Mark this thread as Unsold
For Sale Lots of turbo goodies, miscellaneous parts
Lots of turbo goodies, miscellaneous parts
Everything is sold except for the DP!
Long story short, I traded my balt for a 07 STI. I've got tons of turbo parts that are basically new. They all need to go. Prices are negotiable, but don't low ball too much please.
Garrett TO4E 57 trim .63 A/R Stage 3 wheel SOLD!
Turbocharger Specs
Turbo Style: Garrett T3/T4 Turbocharger
Bearing Style: Wet-Float
Compressor Inlet: 3.00"
Compressor Outlet 2.00" (50.8mm)
Turbine Inlet T3 Style Flange
Turbine Outlet 2.50" 4-Bolt Flange
Turbine A/R: .63 A/R
Compressor A/R: .60 A/R Stage 3 Wheel 60 Trim
Cooling: Oil Cooled
Wastegate: Tial External 7PSI (0.50Bar)
I drove with this for less than 50 miles. It will not require a rebuild obviously, since it is brand new. It looks like I just took it out of the box, no issues whatsoever. My experience with it is that it spools at around 2.5k-3.5k. This particular turbo can handle power levels up to 400 hp, so it's got a lot of potential. I bought it for $900, and I'm asking $500 since right now it's just a paper weight on my desk.
Turbo XS RFL Bypass Valve (BOV) SOLD!!!!
Like the turbo and all the other parts, this was barely used. Turbo XS RFL run about 180-200. This is no knock off. Priced to move.
Tial 38mm Wastegate (7 psi, adjustable) SOLD!!!
I'm not at home to snap a pic of this by itself. I'll get that when I can. Brand new, these run about $220+. It is genuine and like everything else, practically new.
27" Turbo XS Intercooler SOLD!!!
Just as described above. This should be good for power levels up to 350 hp. No bent fins, in great condition still. I bought it for $150, asking $75. I'll also throw in the mounting brackets since they will line up perfectly with the cobalt front impact bar.
2.5" Turbo back downpipe ($75 obo) prefer local pickup, or buyer pays shipping.
I'll get some pics of this when I get back. This will bolt up perfectly to a 2.2 right where the turbo lines up. To guarantee fitment, you would have to have the same turbo, and same exhaust manifold. My turbo manifold was a Vulcan log manifold. This was custom made, so if you have any other configuration it probably won't fit.
HKS SSQV Super Sequential BOV SOLD!!!!
More pics and goodies to come later.
Long story short, I traded my balt for a 07 STI. I've got tons of turbo parts that are basically new. They all need to go. Prices are negotiable, but don't low ball too much please.
Garrett TO4E 57 trim .63 A/R Stage 3 wheel SOLD!
Turbocharger Specs
Turbo Style: Garrett T3/T4 Turbocharger
Bearing Style: Wet-Float
Compressor Inlet: 3.00"
Compressor Outlet 2.00" (50.8mm)
Turbine Inlet T3 Style Flange
Turbine Outlet 2.50" 4-Bolt Flange
Turbine A/R: .63 A/R
Compressor A/R: .60 A/R Stage 3 Wheel 60 Trim
Cooling: Oil Cooled
Wastegate: Tial External 7PSI (0.50Bar)
I drove with this for less than 50 miles. It will not require a rebuild obviously, since it is brand new. It looks like I just took it out of the box, no issues whatsoever. My experience with it is that it spools at around 2.5k-3.5k. This particular turbo can handle power levels up to 400 hp, so it's got a lot of potential. I bought it for $900, and I'm asking $500 since right now it's just a paper weight on my desk.
Turbo XS RFL Bypass Valve (BOV) SOLD!!!!
Like the turbo and all the other parts, this was barely used. Turbo XS RFL run about 180-200. This is no knock off. Priced to move.
Tial 38mm Wastegate (7 psi, adjustable) SOLD!!!
I'm not at home to snap a pic of this by itself. I'll get that when I can. Brand new, these run about $220+. It is genuine and like everything else, practically new.
27" Turbo XS Intercooler SOLD!!!
Just as described above. This should be good for power levels up to 350 hp. No bent fins, in great condition still. I bought it for $150, asking $75. I'll also throw in the mounting brackets since they will line up perfectly with the cobalt front impact bar.
2.5" Turbo back downpipe ($75 obo) prefer local pickup, or buyer pays shipping.
I'll get some pics of this when I get back. This will bolt up perfectly to a 2.2 right where the turbo lines up. To guarantee fitment, you would have to have the same turbo, and same exhaust manifold. My turbo manifold was a Vulcan log manifold. This was custom made, so if you have any other configuration it probably won't fit.
HKS SSQV Super Sequential BOV SOLD!!!!
More pics and goodies to come later.
Last edited by Sentry; Dec 16, 2010 at 08:55 AM.
Senior Member
iTrader: (5)
Joined: 02-16-08
Posts: 8,405
Likes: 0
From: Fairfield, CA/Travis AFB, CA
i can vouch for the turbo xs type h/rfl. they sound good as hell. im runnin one right now. if you want a head turner, get that BOV
tae goin turbo instead of supercharged? GOOD CHOICE!!! lol
tae goin turbo instead of supercharged? GOOD CHOICE!!! lol
bump
Sorry guys I don't check these forums anymore really. If you want to work out a deal just pm me. Otherwise I won't get an email.
All reasonable offers will be considered. Just offer.
Sorry guys I don't check these forums anymore really. If you want to work out a deal just pm me. Otherwise I won't get an email.
All reasonable offers will be considered. Just offer.
Turbo and wastegate have been sold!
Pending sale on the IC, piping, and both BOVs. First come first serve, peeps!
Btw, send me pm's if interested. I don't check this thread enough to see the replies.
Also, the tubular manifold that you see attached to the turbo is also for sale. It's a D16 honda manifold, not ecotec. $50 + shipping on that.
Pending sale on the IC, piping, and both BOVs. First come first serve, peeps!
Btw, send me pm's if interested. I don't check this thread enough to see the replies.
Also, the tubular manifold that you see attached to the turbo is also for sale. It's a D16 honda manifold, not ecotec. $50 + shipping on that.
Thread
Thread Starter
Forum
Replies
Last Post



