I have an 06 ss coablt and i am looking at putting some mods on it in the near future.

I would like:

Injen Cold Air Intake
GM Stage 1 Kit
2-3 pillar for gauges
Gauges (Boost, Water temp, Oil Pressure)
Short Throw Shifter

Thanks.

 

Why a water temp and oil pressure gauge instead of a scan gauge and AFR?

 

Don't buy GM Stage 1. If you are planning on buying a GM kit buy GM Stage 2. You will see better gains. GM Stage 1 is nice if all you are looking for is the GM Stage Tune and larger injectors so you can pulley down, but by its self it isn't that great.

 

Well how much more is the stage two than the stage 1. Im going to get it dyno tuned also

What is the scan gauge and afr. Is it all digital or something. Is it just one thing

 

if you are getting a dyno tune don't waste your money on the GM Stage kits then. Go out and buy 60 lb/hr injectors, a 2.8 pulley, and get a custom dyno tune (don't forget cooling mods). GM stage kits are only worth it if you plan on staying with their tune, injectors, and pulley. You can piece together a nice setup cheaper than a GM stage kit for sure.

 

Thank you!!!

What brand of injectors and pulley should i get?

 

http://www.zzperformance.com/cobalt_...=578&catid=174

as for pulley size .... that depends on how far you want to go. i would stick with a 2.8".

 

OTT Stage 1 kit is your best option.

And honestly, brand of pulley doesn't make a difference.

But go to over the top performance. They'll help you out with what you need and they have the best prices around.

 

How much horsepower will i gain with the 60lbs injectors and 2.8"

 

Most see around 260-260 whp, depends on the Tune

 

Thanks for all of the help guys

Where can i buy a 2.8" pulley?

 

Same site as the injectors

 

http://www.ottperformance.com/store/...-2-Kit-4p6.htm

this is the best kit for the money

This is our stage 2 kit for supercharged cobalts and Ions. Expect about 40 horse power at the wheels depending on other supporting mods.

Kit Contents
2.8" Smoothflow MPS or Stage 2 Pulley (option)
60lb Flowmatched Injectors
Injector Harness
Larger Idler Pulley or Stage 2 Belt (option)
NGK 1 Step Colder Copper Plugs
OTT Stage 1 PCM

I love mine!!!

 

What kind of cooling mods should i get if i get the 60lb injectors and the 2.8" pulley? Is there anything else i should get with these mods?

 

Cooling Mods- Dual Pass, option b, Heat Exchanger zzp/ottp doesnt matter and I agree dont get the GM stage 1 its pointless stick with a pro tune from a local tuner or and zzp/ottp tune

 

The OTTP Stage 2 kit is pretty awesome and cheap. Get the Heat Exchanger to go with it.

 

Thanks again everyone. If you have anything else let me know

 

i have all 3 gauges your lookin for...pm me for info