Mark this thread as Unsold
For Sale MSD Dashhawk Vehicle Information Display
#1
Senior Member
Thread Starter
Join Date: 07-29-08
Location: Dracut, MA
Posts: 596
Likes: 0
Received 0 Likes
on
0 Posts
MSD Dashhawk Vehicle Information Display
For sale is my MSD Dashhawk. I bought this off another member a few months back for $200.
I will let it go for $150 solid plus shipping.
You'll receive the Dashhawk, the OBD2 connector, and a modified cell phone holder mounted to my windshield I used to hold the display (I had it on the drivers side windshield and the display sat perfectly under the boost gauge).
The Dashhawk will only work on CAN equiped Cobalts. This is very important to know before buying, because the Supercharged SS do not use a CAN interface. In short this will work on all models except for Supercharged SS's.
The Dashhawk is in perfect condition and works exactly like you'd expect it to. I upgraded it to the most recent firmware and you can connect it to your PC with a mini USB to regular USB adapter (the software is downloadable on MSD's website).
Here is the info on the parameters you can see: http://www.dashhawk.com/parameters.html
The Dashhawk can be used for a whole hell of a lot of stuff and you can actively record parameters and later upload them to your PC. The Dashhawk can show more parameters than the Interceptor gauge and can show more on the screen at one time, up to 7 I believe. The only trade off here is you cannot mount it in the A-pillar like you can with the Interceptor.
And for the pics:
I will let it go for $150 solid plus shipping.
You'll receive the Dashhawk, the OBD2 connector, and a modified cell phone holder mounted to my windshield I used to hold the display (I had it on the drivers side windshield and the display sat perfectly under the boost gauge).
The Dashhawk will only work on CAN equiped Cobalts. This is very important to know before buying, because the Supercharged SS do not use a CAN interface. In short this will work on all models except for Supercharged SS's.
The Dashhawk is in perfect condition and works exactly like you'd expect it to. I upgraded it to the most recent firmware and you can connect it to your PC with a mini USB to regular USB adapter (the software is downloadable on MSD's website).
Here is the info on the parameters you can see: http://www.dashhawk.com/parameters.html
The Dashhawk can be used for a whole hell of a lot of stuff and you can actively record parameters and later upload them to your PC. The Dashhawk can show more parameters than the Interceptor gauge and can show more on the screen at one time, up to 7 I believe. The only trade off here is you cannot mount it in the A-pillar like you can with the Interceptor.
And for the pics:
Thread
Thread Starter
Forum
Replies
Last Post
DANRICKARD
Problems/Service/Maintenance
8
10-01-2015 12:08 AM