Mark this thread as Unsold
For Sale OTTP 2.8/60s/PCM/DP for GMS2 and DP in NC
OTTP 2.8/60s/PCM/DP for GMS2 and DP in NC
I had a buddy who had Hp Tuners so this was put together at one time with the ability to tune and tweak it. We went our seperate ways and I got a Trifecta tune over the HP tune.
I dont have any intent of tuning it any further so I want something with a bit more than stock in exchange for my setup.
I will need you dp with cat as well for my catless stocker, as the Trifecta tune has the cat codes deleted. Looking for a straight swap, nothing more. MUST BE IN NC and willing to come to me as I work at a shop and this will be SO much easier there.
I intend to swap you my Trifecta tuned PCM for your flashed GMS2 PCM, My S/C with the hub and 2.8 already on for your S/C with the hub and 3.0, my 60s with harness for your 42s and harness, and my catless stocker dp for your aftermarket or stock dp.
Thats it. I explained why.......it works fine....its my daily so with both of us working we can
do this in minimal time. Figure hour and a half at most. I have the tensioner with the oversized pulley so bear that in mind.....we could swap tensioners too I suppose but its a PITA.
__________________
I dont have any intent of tuning it any further so I want something with a bit more than stock in exchange for my setup.
I will need you dp with cat as well for my catless stocker, as the Trifecta tune has the cat codes deleted. Looking for a straight swap, nothing more. MUST BE IN NC and willing to come to me as I work at a shop and this will be SO much easier there.
I intend to swap you my Trifecta tuned PCM for your flashed GMS2 PCM, My S/C with the hub and 2.8 already on for your S/C with the hub and 3.0, my 60s with harness for your 42s and harness, and my catless stocker dp for your aftermarket or stock dp.
Thats it. I explained why.......it works fine....its my daily so with both of us working we can
do this in minimal time. Figure hour and a half at most. I have the tensioner with the oversized pulley so bear that in mind.....we could swap tensioners too I suppose but its a PITA.
__________________
Thread
Thread Starter
Forum
Replies
Last Post
Josh@ottp
Supporting Vendor Deals & Group Purchases
0
Sep 8, 2015 10:18 AM



