Parts Buy and sell your parts
Mark this thread as Unsold

Wanted s/c and parts for 2.4l

Thread Tools
 
Search this Thread
 
Old Aug 1, 2009 | 01:25 AM
  #1  
chu77's Avatar
Thread Starter
New Member
 
Joined: 11-22-08
Posts: 42
Likes: 0
From: Edmonton, ab
s/c and parts for 2.4l

I want to s/c the 2.4, anyone looking to upgrade their s/c?
Old Aug 1, 2009 | 09:40 AM
  #2  
Gene Culley's Avatar
Senior Member
iTrader: (1)
 
Joined: 03-28-09
Posts: 1,583
Likes: 1
From: Reading
Talking

It is probably best for you to get a list, I could send you mine, and then ask for parts.
Old Aug 1, 2009 | 09:41 AM
  #3  
samsumthing's Avatar
Senior Member
 
Joined: 05-29-06
Posts: 1,263
Likes: 0
From: chicagoland
there are a few people selling complete s/c kits for around $1200
Old Aug 1, 2009 | 09:43 AM
  #4  
Gene Culley's Avatar
Senior Member
iTrader: (1)
 
Joined: 03-28-09
Posts: 1,583
Likes: 1
From: Reading
Talking

Originally Posted by samsumthing
there are a few people selling complete s/c kits for around $1200
While I agree, the kits aren't complete. I just did a SC install on my car and I have a running list and it isn't any $1200.
Old Aug 1, 2009 | 10:06 AM
  #5  
chu77's Avatar
Thread Starter
New Member
 
Joined: 11-22-08
Posts: 42
Likes: 0
From: Edmonton, ab
Hummm here is a short list

supercharger with the throttle body, intake, injectors and
injector harness and intake mani, intake map sensor, intercooler pump
(wiring/connectors and bracket) and Heat exchanger + bracket + tubing
Old Aug 1, 2009 | 10:09 AM
  #6  
NJjon's Avatar
Senior Member
 
Joined: 06-15-09
Posts: 719
Likes: 0
From: Hightstown NJ
Originally Posted by Gene Culley
While I agree, the kits aren't complete. I just did a SC install on my car and I have a running list and it isn't any $1200.
Why do you say that? Most of these "kits" people are selling were pre-installed on their car, and I'm sure they didnt have half a set up installed on their car.
While I agree that you may be missing a few nuts and bolts, I do not agree that these kits are incomplete...
Old Aug 1, 2009 | 10:29 AM
  #7  
Gene Culley's Avatar
Senior Member
iTrader: (1)
 
Joined: 03-28-09
Posts: 1,583
Likes: 1
From: Reading
Talking

Originally Posted by NJjon
Why do you say that? Most of these "kits" people are selling were pre-installed on their car, and I'm sure they didnt have half a set up installed on their car.
While I agree that you may be missing a few nuts and bolts, I do not agree that these kits are incomplete...
Simply because I just did the job on my car and I know that those aren't all of the parts required.

I'll back up my statement. Of course there are some gauges here... in my list... but tell me they have all of this...

Final Supercharger Parts List

GM Parts

11900248 – LSJ TB To SC Bolts (4)
12575463 – LSJ TB Gasket
12584342 – LSJ Supercharger Gasket
12594387 – LSJ IC Pump Insulator
12597855 – LSJ Intake Manifold Gasket
12597993 – LSJ Stage 2 Serpentine Belt
15247280 – LSJ Upper Radiator Hose
11516342 – LSJ Intake Manifold Mount To Block Bolts (2)
11589214 – LSJ Supercharger to Intake Manifold Bolts (4)
12345982 – Genuine GM Supercharger Oil (Qty 2) 4 oz ea))
12584369 – LSJ TB To Purge Solenoid Tube
12585150 – LSJ IC Pump Rear Bracket To Intake Manifold Mount
12586367 – LSJ IC Pump Front Bracket To Rear Bracket
12586632 – LSJ Lower Intake Manifold Mount
15075118 – LAP | L61 | L65 Coolant Reservoir Cap
15231157 – LSJ Downpipe To Cat Back Gasket
15235773 – LSJ Exhaust Manifold To Downpipe Gasket
15253932 – LSJ Power Brake Booster Vacuum Hose
22729469 – LSJ Windshield Washer Container
22732432 – LSJ Wiper Cowl To Washer Container Hose
88986255 – LSJ 8 Pin TB Connector (LAP | L61 Only 6 pin)
89046833 – IC Pump Connector
90537953 – LSJ Exhaust Manifold Heat Shield
15411879 – 2005 Cavalier Injector Wiring Harness. No cutting needed using GM Stage 2 Injectors

New Parts

ZZP Heat Exchanger
ZZP Triple Gauge Pod
OTTP SS SC Pulley Bolts
Aeroforce Interceptor Gauge
GlowShift Vacuum | Boost Gauge
AEM Wideband Air | Fuel Ratio Gauge
OTTP 3.0 Polished Pulley (For Stage 2 Hub)
M-8501-L54 Ford Racing Intercooler Pump
NGK Copper Spark Plugs (Part# LFR6A-11)


Used Parts

Eaton M62 Supercharger
GM Stage 2 Injectors (42lbs)
Stock LSJ Air Intake
Stock LSJ Tensioner
Stock LSJ Downpipe
Stock LSJ Idler Pulley
Stock LSJ Throttle Body
Stock LSJ Intake Manifold
Stock LSJ Exhaust Manifold
Stock LSJ Alternator Bracket

Standard Bolts Needed (Not GM)

MAP To Intake Manifold
M6 x 1.0 x 25 (Qty 1)

LSJ Intake Manifold Mount Bracket To Intake Manifold
M10 X 1.50 x 50 (Qty 1)

LSJ Rear IC Pump Bracket To Intake Manifold Mount
M8 X 1.25 X 25 – (Qty 2)

LSJ Front IC Pump Bracket To Rear IC Pump Bracket
M8 X 1.25 X 35 – (Qty 2)

LSJ Idler Pulley To Alternator Bracket
M8 x 1.25 x 25

LSJ Intake Manifold To Block
M6 x 1.0 X 75 (Qty 2)
M6 x 1.0 x 25 (Qty 5)

LSJ Alternator Bracket To Block
M8 X 1.25 X 130 (Qty 3)

LSJ SC Bypass Valve To SC
M8 X 1.25 X 20 (Qty 2)

LSJ Tensioner Lower To Alternator Bracket
M8 x 1.25 x 35

LSJ Tensioner Upper To Alternator Bracket
M8 X 1.25 x 40… not standard bolt though. Has to be metric hex socket bolt.

LSJ SC Reservoir Bracket To SC
M6 x 1.0 x 15 (Qty 2)

LSJ SC Reservoir To SC Reservoir Bracket
M6 x 1.0 x 15 (Qty 2)
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jesse
Parts
22
Oct 20, 2015 09:56 PM
justinchinn
General Cobalt
3
Oct 2, 2015 12:18 PM
dieGone
Complete Cars
0
Oct 1, 2015 06:27 PM
metroplex
Appearance
0
Sep 27, 2015 07:48 AM
GBRunner24
Featured Car Showcase
3
Sep 26, 2015 06:44 PM




All times are GMT -4. The time now is 01:30 AM.