Mark this thread as Unsold
For Sale Sox-Fan part out thread
09-06-2013, 09:05 AM
#1
Sox-Fan part out thread
I've parted out my car. Post here. Texts, Facebook messages, smoke signals, PMs, or whatever else will just be ignored.
I'll repeat that. Post Here.
I really suck at at taking pictures. If anyone is interested in some of these parts and needs another picture just ask.
This is what I have left.
Forge BPV.
I do have both springs, the second will be in the shipping container. I just forgot to stick it in the picture. I do only have 2 of three bolts. dropped one. Your stock one has all 3 though, right? right? $115, shipped.
K&N intake. Comes with brackets for both Valve cover types. The ziplock in the picture is the hardware.
$200 shipped.
wheel spacers 5mm x 110. CED has them for $18.00 each plus shipping. That's what I paid John Powell for these. I need to cover my shipping on them. $35.00 SHIPPED.
LNF Extrude honed intake, ported and polished throttle body and Werks phenolic spacer setup. Prefer not to break this set up as it works so well together. Bolted this setup on, let Terminator 2 do his magic, gained an incredible 36 ft lbs tq on the dyno. You can see in the pictures that the intake is tapped for meth injection though I never hooked that up. With the phenolics we ran 14 consecutive AutoX passes at Darlinton, in 93 degree weather. After we were done you could put your hand on the intake without burning yourself and actually grip the throttle body in your hand. It wasn't even warm. These phenolics work very well. You will need your stock PCV valve and a tube of permatex grey. Hardware is included. $500 shipped for the entire setup.
LNF valve cover hasn't been sand blasted, powder coated, heated or anything that could clog or melt the baffles. $75 shipped
I'll repeat that. Post Here.
I really suck at at taking pictures. If anyone is interested in some of these parts and needs another picture just ask.
This is what I have left.
Forge BPV.
I do have both springs, the second will be in the shipping container. I just forgot to stick it in the picture. I do only have 2 of three bolts. dropped one. Your stock one has all 3 though, right? right? $115, shipped.
K&N intake. Comes with brackets for both Valve cover types. The ziplock in the picture is the hardware.
$200 shipped.wheel spacers 5mm x 110. CED has them for $18.00 each plus shipping. That's what I paid John Powell for these. I need to cover my shipping on them. $35.00 SHIPPED.
LNF Extrude honed intake, ported and polished throttle body and Werks phenolic spacer setup. Prefer not to break this set up as it works so well together. Bolted this setup on, let Terminator 2 do his magic, gained an incredible 36 ft lbs tq on the dyno. You can see in the pictures that the intake is tapped for meth injection though I never hooked that up. With the phenolics we ran 14 consecutive AutoX passes at Darlinton, in 93 degree weather. After we were done you could put your hand on the intake without burning yourself and actually grip the throttle body in your hand. It wasn't even warm. These phenolics work very well. You will need your stock PCV valve and a tube of permatex grey. Hardware is included. $500 shipped for the entire setup.
LNF valve cover hasn't been sand blasted, powder coated, heated or anything that could clog or melt the baffles. $75 shipped
Last edited by Sox-Fan; 11-05-2013 at 10:08 AM. Reason: sold another part, thanks.
I'll have to check back when mod'ing funds are higher
09-06-2013, 10:02 AM
#11
I also have a Tjin, but I will not ship that. WHen I checked into shipping it was more than the actual trunk was worth.
I've already sold my retros, intake, throttle body, shorty antenna, trap door oil pan.
Oh, I will also have a valve cover too, and a Powell Oil Separator to sell.
I've already sold my retros, intake, throttle body, shorty antenna, trap door oil pan.
Oh, I will also have a valve cover too, and a Powell Oil Separator to sell.
09-06-2013, 10:11 AM
#12
Senior Member
Join Date: 06-13-08
Location: Waltham MA
Posts: 1,907
Likes: 0
Received 0 Likes
on
0 Posts
My bad, just saw the post here thing lol. I already PM'd you.....
Price on K&N intake and Forge BPV???
Damn, you sold that intake quick! Powell oil separator price?
Price on K&N intake and Forge BPV???
Damn, you sold that intake quick! Powell oil separator price?
Last edited by 80vetteL82; 09-06-2013 at 10:11 AM. Reason: Automerged Doublepost
09-06-2013, 10:15 AM
#13
The intake/throttle body/phenolics were sold before they even come off the car. Most of the parts on the car are sold before they even come off, haha.
I don't know on the K&N. I want to get it off the car and make sure that it's perfect before I price it out. I also don't have the mount bracket for the 09-10 cars, just for the earlier valve cover, the 08's. The separator I might not sell yet. I'm waiting on John Powell to send out the check valves. I'll probably wait till I get that, so I can ship the whole thing all at one time.
I don't know on the K&N. I want to get it off the car and make sure that it's perfect before I price it out. I also don't have the mount bracket for the 09-10 cars, just for the earlier valve cover, the 08's. The separator I might not sell yet. I'm waiting on John Powell to send out the check valves. I'll probably wait till I get that, so I can ship the whole thing all at one time.
09-06-2013, 10:38 AM
#14
Senior Member
Join Date: 06-13-08
Location: Waltham MA
Posts: 1,907
Likes: 0
Received 0 Likes
on
0 Posts
The intake/throttle body/phenolics were sold before they even come off the car. Most of the parts on the car are sold before they even come off, haha.
I don't know on the K&N. I want to get it off the car and make sure that it's perfect before I price it out. I also don't have the mount bracket for the 09-10 cars, just for the earlier valve cover, the 08's. The separator I might not sell yet. I'm waiting on John Powell to send out the check valves. I'll probably wait till I get that, so I can ship the whole thing all at one time.
I don't know on the K&N. I want to get it off the car and make sure that it's perfect before I price it out. I also don't have the mount bracket for the 09-10 cars, just for the earlier valve cover, the 08's. The separator I might not sell yet. I'm waiting on John Powell to send out the check valves. I'll probably wait till I get that, so I can ship the whole thing all at one time.
09-06-2013, 11:26 AM
#19
New Member
Join Date: 03-07-13
Location: Houston
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Hey whats up man, Ive been looking for exhaust parts. You wouldn't be parting anything like catbacks or downpipes would you???? I REALLLLLYYY need them, let me know man! thanks!
-Luis
-Luis
09-06-2013, 12:06 PM
#20
As am I, but it is time to move on.
No. My car has a $40 no name resonator welded on by a muffler shop out in Washington. Worked out to be the best sounding exhaust I've heard on a Cobalt. It's staying on the car. The stock one hit the trash years ago.
09-06-2013, 12:11 PM
#21
Legit on that, your car does sound amazing.
As for the shifter situation.
I have my stock stuff in the box.
Should a person want to buy your BPS they can pay shippinf from me to you for my stock but they need to send me their stock stuff when they install your BPS. I'll gladly help out a member, but I need stock stuff back because I keep it should I ever need it or part out my car.
As for the shifter situation.
I have my stock stuff in the box.
Should a person want to buy your BPS they can pay shippinf from me to you for my stock but they need to send me their stock stuff when they install your BPS. I'll gladly help out a member, but I need stock stuff back because I keep it should I ever need it or part out my car.
