yeah, i want to know my numbers too!!!

 

if you pulley down makesure and do some coolin mods

 

if you doubt the IDC, look at your injector pulsewidths. i bet they are around 20msec (static)
i had a 2.9" pulley on my stage 2 set up and was seeing IDCs of 125% and pulsewidths of 21msec it fell on its face at 6k rpm. i saw no increase in my trap speed. just got more bottom end pull. i posted some screen shots of my HPT logs here lots of good info in that thread.

 

It's weird that you are seeing 119% IDC's . I was taking a snapshot with a tech2 and saw the same exact number with my stock GM stage 2 .

 

You saw 119% IDC's with your Stage 2 pulley, but then went down to a (slightly) smaller Stage 3 pulley???

Did I read that wrong???

 

why is this in the classifieds?

 

thus is why:
Title edited for more description.

 

yep , i checked them again after that and saw lower IDC's so i figured it had to be a problem was the pig rich stage tune.

 

So now you have lower IDC's with the smaller (Stage 3) pulley than you had with the Stage 2 pulley??

That's weird