Devil's Own Progressive Kit Installed! w/ Pics!
#1
Bannned
Thread Starter
Join Date: 09-08-07
Location: Kaneohe, HI
Posts: 8,743
Likes: 0
Received 0 Likes
on
0 Posts
Devil's Own Progressive Kit Installed! w/ Pics!
another bad ass install by myself/stryder/ssmokin. this was put on Matt's car. the install was simple and easy to do. this DOI kit is pretty sweet. here are pics of the install. hope you like!
we mounted the pump behind the headlight. sleeper style.
close up
as you can see, Matt used his own bolts. the tank wont be able to bolt up against the frame anymore. but the other two bolts that hold it down are more than enough to keep it stable and in place.
here is the pump installed with the headlight bracket in place.
close up
and here is the nozzle that is tapped into the cobalt addiction spacer. let me tell that this is spacer = ****.
another view
better view
here is the controller mounted on the inside of the car. check out the hella cool ass pedals and 7" dvd screen. pimpin
finished display. are you stock? sleepa
Matt has no comments
we mounted the pump behind the headlight. sleeper style.
close up
as you can see, Matt used his own bolts. the tank wont be able to bolt up against the frame anymore. but the other two bolts that hold it down are more than enough to keep it stable and in place.
here is the pump installed with the headlight bracket in place.
close up
and here is the nozzle that is tapped into the cobalt addiction spacer. let me tell that this is spacer = ****.
another view
better view
here is the controller mounted on the inside of the car. check out the hella cool ass pedals and 7" dvd screen. pimpin
finished display. are you stock? sleepa
Matt has no comments
#8
Senior Member
Join Date: 06-20-07
Location: Auburn, Alabama
Posts: 823
Likes: 0
Received 0 Likes
on
0 Posts
#10
Bannned
Thread Starter
Join Date: 09-08-07
Location: Kaneohe, HI
Posts: 8,743
Likes: 0
Received 0 Likes
on
0 Posts
#11
Senior Member
Join Date: 08-27-06
Location: Oceanside, SOCAL
Posts: 6,075
Likes: 0
Received 0 Likes
on
0 Posts
is there a ground wire? and if so, is it grounded properly?
and if it's the controller then i have no idea
Last edited by Mnatvyc1223; 04-13-2008 at 11:26 PM. Reason: Automerged Doublepost
#12
Bannned
Thread Starter
Join Date: 09-08-07
Location: Kaneohe, HI
Posts: 8,743
Likes: 0
Received 0 Likes
on
0 Posts
Matt says when his **** starts spraying his afr jumps to the mid 15s... wtf! that makes no sense at all. should be rich if anything
Last edited by ColeJJones; 04-13-2008 at 11:54 PM. Reason: Automerged Doublepost
#14
Bannned
Thread Starter
Join Date: 09-08-07
Location: Kaneohe, HI
Posts: 8,743
Likes: 0
Received 0 Likes
on
0 Posts
#15
Senior Member
Join Date: 11-21-06
Location: San Diego
Posts: 2,526
Likes: 0
Received 0 Likes
on
0 Posts
piece of ****...had to bore it out to get the bolts to line up with the throttle body...however, now that it fits i must say, its keeps that throttle body pretty cool...
#16
Senior Member
Join Date: 08-14-06
Location: San Diego, CA
Posts: 2,760
Likes: 0
Received 0 Likes
on
0 Posts
it does the job after you make it fit. and we don't know whats up with the controller, by the instructions it is hooked up correctly so blah. we will know more tomarrow.
#17
Senior Member
Join Date: 11-21-06
Location: San Diego
Posts: 2,526
Likes: 0
Received 0 Likes
on
0 Posts
BTW. i wanted to say thanks to Stryder and Colejjones for all your help!
Last edited by ssmokin; 04-14-2008 at 12:26 AM. Reason: Automerged Doublepost
#19
Bannned
Thread Starter
Join Date: 09-08-07
Location: Kaneohe, HI
Posts: 8,743
Likes: 0
Received 0 Likes
on
0 Posts
^ lol
np, we got your back.
yeah, i forgot to ground the controller, then i grounded it... its still weird. my AFR is like 15 at WOT so now i dont know if my sensor is fucked up or what. then i threw a p0107=MAP sensor low circuit voltage ...i dunno..i got tired, gonna start messing with it again tomorrow...
i bought the black AC controls on e bay for $25. A far as the red dash pieces, i painted them with gm color match paint and used about 5 coats of clear!
BTW. i wanted to say thanks to Stryder and Colejjones for all your help!
i bought the black AC controls on e bay for $25. A far as the red dash pieces, i painted them with gm color match paint and used about 5 coats of clear!
BTW. i wanted to say thanks to Stryder and Colejjones for all your help!
Last edited by ColeJJones; 04-14-2008 at 12:28 AM. Reason: Automerged Doublepost
#21
Former Vendor
Join Date: 05-18-07
Location: Oklahoma City
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
Warrentys are a good thing for you.. go over the wiring very good and make sure its all got good connections. It can short out if ran without a ground. Does not always happen but its not good for it. After checking evertying and its still acting funny let me know and we will get you the rma paperwork. I will need your email adress for these. Best to send me email direct so i can just respond to it. No harm no foul we will fix you up.
#22
Senior Member
Join Date: 11-21-06
Location: San Diego
Posts: 2,526
Likes: 0
Received 0 Likes
on
0 Posts
Warrentys are a good thing for you.. go over the wiring very good and make sure its all got good connections. It can short out if ran without a ground. Does not always happen but its not good for it. After checking evertying and its still acting funny let me know and we will get you the rma paperwork. I will need your email adress for these. Best to send me email direct so i can just respond to it. No harm no foul we will fix you up.