Ok so I know very little about my balt. 05 ss/sc 100k miles. The car and clutch feel great, no slipping. I noticed last week, I reved my motor at a c5 vette going 70. I pushed the clutch in and reved it to probably 5k. The clutch pedal immediatly went higher then normal and felt weird. So last night, I got stopped by a turbo j. He asked me to hear my S/C so I pushed clutch in and reved it to 5k. I immediatly went to back up. The car went right into gear, but felt as if there was no clutch. It did not slip. It was fine after about 1 minute of driving. Any ideas as to wth is going on? The clutch fluid is full and when I WOT it it does not slip.

 

It feels like no fluid pressure, but the fluid tank is full.

 

Slave cylinder/TOB probaly needs to be replaced.Could be the master cylinder but its unlikely.

 

That is kinda what I was thinking. How hard is it to do?

 

Bet u over extended the TOB by doing your ricer revs

 

It's like a clutch job basically. Removal of the transmission.

 

It is possible. Now first gear, I have to let nearly all the way up on the pedal to get it to move. The clutch still is holding.
Well poop. Oh well Ill just turn it over to my mechanic.