Utah SS/SC's
Originally Posted by Yodair8
Murray, I hate murray. It's the same jurisdiction that gave me a no front license and tint ticket...........
Haha, luckily the cop didn't say anything about my license or tint, I didn't fix either. Hindsight humbles me.
Haha, luckily the cop didn't say anything about my license or tint, I didn't fix either. Hindsight humbles me.
I can't stand the way traffic laws are set up. Policeman should not have quotas. It's rediculous.
Street. I jsut don't see how I'm going to be able to until next week or so. How much power are you going to have after your new engine?
I raced video a little bit ago, and judging from how our race went and how your race went with him, it seemed like we'd be neck and neck.
Street. I jsut don't see how I'm going to be able to until next week or so. How much power are you going to have after your new engine?
I raced video a little bit ago, and judging from how our race went and how your race went with him, it seemed like we'd be neck and neck.
OK Orlando, you said it. Me and you, after the new motor is broken in..........
How much power? Not sure.
Mods listed
98 Stratus 2.4 Block, Crank, Head.
05 PT CRUISER Springs/Retainers/Lifters
05 SRT-4 Pistons, rods, pins, rings, gaskets, oil pump, water pump, oil pan/pickup, timing setup.
Crane 14 Cams
Cam gears, not sure who yet, most likely FIDANZA. Those will go on after break in.
Forced Fabrications SS Log Style Turbo Manifold
Tial 40MM external gate.
Garrett T3/T4 60 Trim. .60 AR compressor, .63
3" O2 housing, 3" downpipe, 3" Exhaust all the way back.
Custom Box plenum intake manifold 4.1 litre
75MM BBK Mustang Throttle Body
576cc injectors
Solid Front Motor Mount
Side Motor Mount Inserts
Solid Adjustable Rear motor mount
Spec Stage IV Clutch
MPP Diff Pin Saver
Exile Racing LSD
Most likely the stock SRT FMIC, since my other piping for my other intercooler wont be done yet.
225/50/15 Drag Radials.
I think thats all, I dunno I may need to add as I remember, but thats the basics.
Oh wait, INTRAX SPRINGS, KYBGR2 struts, Prothane Bushings all around.
How much power? Not sure.
Mods listed
98 Stratus 2.4 Block, Crank, Head.
05 PT CRUISER Springs/Retainers/Lifters
05 SRT-4 Pistons, rods, pins, rings, gaskets, oil pump, water pump, oil pan/pickup, timing setup.
Crane 14 Cams
Cam gears, not sure who yet, most likely FIDANZA. Those will go on after break in.
Forced Fabrications SS Log Style Turbo Manifold
Tial 40MM external gate.
Garrett T3/T4 60 Trim. .60 AR compressor, .63
3" O2 housing, 3" downpipe, 3" Exhaust all the way back.
Custom Box plenum intake manifold 4.1 litre
75MM BBK Mustang Throttle Body
576cc injectors
Solid Front Motor Mount
Side Motor Mount Inserts
Solid Adjustable Rear motor mount
Spec Stage IV Clutch
MPP Diff Pin Saver
Exile Racing LSD
Most likely the stock SRT FMIC, since my other piping for my other intercooler wont be done yet.
225/50/15 Drag Radials.
I think thats all, I dunno I may need to add as I remember, but thats the basics.
Oh wait, INTRAX SPRINGS, KYBGR2 struts, Prothane Bushings all around.
Originally Posted by Yodair8
I can't stand the way traffic laws are set up. Policeman should not have quotas. It's rediculous.
Street. I jsut don't see how I'm going to be able to until next week or so. How much power are you going to have after your new engine?
I raced video a little bit ago, and judging from how our race went and how your race went with him, it seemed like we'd be neck and neck.
Street. I jsut don't see how I'm going to be able to until next week or so. How much power are you going to have after your new engine?
I raced video a little bit ago, and judging from how our race went and how your race went with him, it seemed like we'd be neck and neck.
Originally Posted by StreetBadges.com
OK Orlando, you said it. Me and you, after the new motor is broken in..........
How much power? Not sure.
Mods listed
98 Stratus 2.4 Block, Crank, Head.
05 PT CRUISER Springs/Retainers/Lifters
05 SRT-4 Pistons, rods, pins, rings, gaskets, oil pump, water pump, oil pan/pickup, timing setup.
Crane 14 Cams
Cam gears, not sure who yet, most likely FIDANZA. Those will go on after break in.
Forced Fabrications SS Log Style Turbo Manifold
Tial 40MM external gate.
Garrett T3/T4 60 Trim. .60 AR compressor, .63
3" O2 housing, 3" downpipe, 3" Exhaust all the way back.
Custom Box plenum intake manifold 4.1 litre
75MM BBK Mustang Throttle Body
576cc injectors
Solid Front Motor Mount
Side Motor Mount Inserts
Solid Adjustable Rear motor mount
Spec Stage IV Clutch
MPP Diff Pin Saver
Exile Racing LSD
Most likely the stock SRT FMIC, since my other piping for my other intercooler wont be done yet.
225/50/15 Drag Radials.
I think thats all, I dunno I may need to add as I remember, but thats the basics.
Oh wait, INTRAX SPRINGS, KYBGR2 struts, Prothane Bushings all around.
How much power? Not sure.
Mods listed
98 Stratus 2.4 Block, Crank, Head.
05 PT CRUISER Springs/Retainers/Lifters
05 SRT-4 Pistons, rods, pins, rings, gaskets, oil pump, water pump, oil pan/pickup, timing setup.
Crane 14 Cams
Cam gears, not sure who yet, most likely FIDANZA. Those will go on after break in.
Forced Fabrications SS Log Style Turbo Manifold
Tial 40MM external gate.
Garrett T3/T4 60 Trim. .60 AR compressor, .63
3" O2 housing, 3" downpipe, 3" Exhaust all the way back.
Custom Box plenum intake manifold 4.1 litre
75MM BBK Mustang Throttle Body
576cc injectors
Solid Front Motor Mount
Side Motor Mount Inserts
Solid Adjustable Rear motor mount
Spec Stage IV Clutch
MPP Diff Pin Saver
Exile Racing LSD
Most likely the stock SRT FMIC, since my other piping for my other intercooler wont be done yet.
225/50/15 Drag Radials.
I think thats all, I dunno I may need to add as I remember, but thats the basics.
Oh wait, INTRAX SPRINGS, KYBGR2 struts, Prothane Bushings all around.
but Ill be Stage 9 by then are you sure u wanna race? ill put down an easy 492348938 whp or so...
oh and i dont wanna race u cuz you're mean to me
Originally Posted by StreetBadges.com
Actually they just had a thing on the news, the cops down south do have quotas, they are not illegal.
Originally Posted by Video2402
gonna have another cobalt meet soon sound good??? maybe more can make it this time!
Originally Posted by domin8_gt
I'm up for it. When does everybody want to get together. Lets try to not do it on a Sunday please. Also, I found another Cobalt and will inform him about it once we get a date finalized.
then you all can take turns racing me!
i know this thread is kinda old but i seen it and i live in utah. i have a red cobalt with black rims and a silver lip. dark tinted windows. you might have seen me around. we should meet up sometime. give me a call 801-808-7510 Jerren
yo, yeah that was me, Hey Jerren, This is John. Yeah, You pulled on me in third. maybe some other time we can go at it again from a dig instead of a roll.
also: I have driven your car before. When I was car shopping I seen yours in auto trader at some small dealer. Weird. I know. That car has some history
also: I have driven your car before. When I was car shopping I seen yours in auto trader at some small dealer. Weird. I know. That car has some history
haha yea i dont like to talk about that. lol but yea we should. i seen you on some videos on streetfire.net also. i have seen you race in person also. and i was woundering since you are selling your car. im not sure if you still are. i really was interested in buying your headlight/foglight setup. its nice. i was gonna buy the black halo's off ebay soon and wanted a hid setup with it. let me know if you wanna sell those to me. and you should show me your car sometime
I actually sold those kits, I liked them, but I want to get another setup soon. Different colors. Different brand. or I would've sold them to you. but those ebay projectors run a different size, that's what I heard, could be wrong though. But they do look good. I'll show you my car sometime. I got your number, when do you wanna meet up? hey! let's just setup a utah cobalt meet. sound good?
I'll chime in on this one about the haol's. I have them on my SS/SC. They do take different lights. I just had to replace a low beam. The lowbeam bulbs are halogen H1 which is much smaller than the factory bulb which is only used as the highbeam.
And I remember somebody posting earlier this month that they wanted a meet. I know it is very short notice, but Rocky Mountain Ecotec, Utah Chapter is having a meet on the 2nd. I won't know what we are doing until tomorrow. I'll then post it up. But, since most of the people that have already said are coming have never met each other, and it is cold inside, I think we might do something indoors.
so what size do i need for the projectors cause i wanted to order some bulbs at the same time i order the headlights. and im down to meet anytime. i wish i was not so cold though. and the snow sucks. i bet everyones car is dirty just like mine. haha. but yea lets setup something. or we could do that thing on the 2nd.


