yes it ended in the beginning of August
BUYHIDS.COM HID Lights HID Kits Xenon Headlights Kit HID Headlight Kits HID Conversion Light

 

So, I got my headlights today and started installing them... but I only received one of the two relays that I paid for. I purchased another relay (for the fogs) after initial purchase to be thrown in when they shipped.

The relay that I did get only has one of the blue harness connectors on it... is that how its supposed to be... I tried intalling (passenger side) without it but it wouldnt work unless I plugged it in, I didnt dare go any further because it is late, so I gave up and put my stock one back in for now.

I couldnt figure out how to install or even hook-up the fog HIDs either. I think the hooking-up part will make more sense when I get the other relay.

Please help...

 

According to my packing slip it was packed with it, Did you check under the packaging under the light? I have no issues with sending you another one Shoot us a PM with your address.

For the relay harness on the headlights, Passanger side does not plug into the blue plug. Only drivers side does. Thats why the harness reaches all the way over so its all controlled by 1 plug. 99% of people could not grasp the concept of 2 harness's we we use TRS harness which is one so its easier... i hoped anyway lol. Im writting a full how-to shortly for it.

 

installed

 

Hey chevy ^^ I haven't hooked up my CCFLs yet cause honestly I wasn't sure if i was missing something. Is it just as simple as splicing in the two wires or what?!

Edit: By the way, the lights look sick. Same setup i got except my halos are white!! Diggin' it for sure!!!
Also, paint that bowtie pronto haha

 

the 2 white wires should have a plug on them that goes to the inverter
then you just have to supply power and ground to the black and red wires

 

ya halos are easy as that but im having problem with my highbeams no work? and this may be the problem but i had nothing to snap the big blue plug on the light in to on the passenger side?

 

Hmm....I guess I'll have to check everything. Pretty sure I don't have an inverter (not even sure what it looks like honestly) anybody have a picture or diagram of it?

 

Nope......that's how it's supposed to be. I was freaking out at first then realized that's what the harness is designed to do. Both lights work off of the driver side harness

 

i got my inverters for my halos yesterday..probably gonna hook it up today here soon. what did you wire yours to chevy? and should i have any other plugs not used..when i got mine all in everything worked but i still had a plug on bothsides not even plugged in from the ballast i think it was..and then a little red and black wire not used..is that gonna be a problem with my halos or is it just the two little white wires that power the halo and thats it..if so im not worried about those other plugs since everything works lol

 

there should be 2
there little black boxes with wires coming out of them

 

nevermind..i just wired them into the parking lights and they work just fine..dont know what the other plugs are for oh well lol

 

So y won't my highs work. Really would like them to. So I dont have to swap out for inspection every yr

 

well my halos were nice while they worked. but when i got in my car a little bit ago to come home my parking lights, halos, all dash lights, tail lights, brake lights, and license plate light do not work now. guess i should have left them not wired..once again chevy, what did you wire your red and black wires to on your inverter to? i went to the black and brown wires off the parking lamps..was the black supposed to go to something else?

 

Take a look back in this thread for my posts. I had problems getting the wiring straight. The problem with the brights is due to the harness having incorrect wiring out of the box. The plug that plugs into the stock blue plug needs it's wires rearranged. I have a picture posted in here with the correct wiring somewhere.

 

dang i got excited thinking the sale was still going on

 

check your High beam fuse
also check the shutter control wires (the little black connector)
also see below

that should work...
i built a harness for mine, ran the red to an add a fuse on my parking light fuse and the ground to the fender bolt

 

it ended in the beginning of August
BUYHIDS.COM HID Lights HID Kits Xenon Headlights Kit HID Headlight Kits HID Conversion Light
Retrofit Headlights

 

Thank you I was being lazy and making someone work for their answers

 

yea sometimes thats easier
but we like to keep our AWESOME Customer Service status

 

Thanks I did see that post I did my searching but I was not sure if this was my problem. Thanks for the help noob to hids And this is the drivers side that needs to be played with ?

 

All harness's should be swapped before there shipped. I may have missed one who knows. make sure your high beam solinoid plug is connected to the blue/black wires. Also i also could have repinned your plug wrong. Take the plug that comes out the back of the headlight. Its a 9006 plug. With the notch facing up, black wire should be to the left, and red should be to the right. Also your PINs in your 9007 plug could be bent. Or it just may be your fuse for your high beams. I test each and every setup on my personal car before there shipped.

woods, if ALL that does not work, its something else in your car..

 

any updates in the shipping orders for the retros?

 

I found a fuse that was blown. Took the halo wiring out of the process and changed the fuse. Everything works..tried doing halos again one of the inverter boxes are fried. Migrate put the halos on their own power source now but don't know what I'm doing since I'm missing 1 inverter box..hopefully the halo didn't blow..I'll figure it out..

 

Me too :[

Whats the difference between all the different HID's on the BuyHID website? Like H1, H3 etc