Hurst STS Hurst STS Hurst STS Hurst STS Hurst STS Hurst STS
I'll post it up soon as I get into the office and look over some pricing. It should be in about 1 hour or so. I'm stuck in the warehouse right now doing some UPS orders and looked over the thread. Give me a few hours and you will be happy
-Karo
No problem at all
-Karo
-Karo
-Karo
Last edited by Karo; Aug 6, 2008 at 02:03 PM. Reason: Automerged Doublepost
I'll post it up soon as I get into the office and look over some pricing. It should be in about 1 hour or so. I'm stuck in the warehouse right now doing some UPS orders and looked over the thread. Give me a few hours and you will be happy
PM me and I'll fix the problem for you.
-Karo
For those wanting the B&M here you go.
https://www.cobaltss.net/forums/show...55#post2699655
-Karo
Last edited by Karo; Aug 6, 2008 at 04:12 PM. Reason: Automerged Doublepost
Do you have a YAHOO email address? If so chances are its either in your SPAM folder OR its the typical YAHOO wait.
Please PM me your information (name, last name, and email address) and I will get you setup so you will be good to go.
-Karo
-karo
More PM's replied and thanks for the 2 orders which came in!
-Karo
Last edited by Karo; Aug 6, 2008 at 08:55 PM. Reason: Automerged Doublepost
PM me and I will take care of it for you ASAP and save you some good money
-Karo
UPS Ground takes apx 1-5 business days depending on your location.
Most of the east coast is about 4-5 business days depending on your exact location.
If someone needs an exact transmit time quote please let me know and I will be more than happy to get you a quote.
-karo
Most of the east coast is about 4-5 business days depending on your exact location.
If someone needs an exact transmit time quote please let me know and I will be more than happy to get you a quote.
-karo
-Karo
oh, thanks, haha i didn't put it on, but i used the loctite and torqued that **** down so i think it should be ok.
I did the same thing. Except i drilled the hole in the pivot ball out and tapped it for a new 5/16 set screw. The 1/4 set screw always came lose so you could twist the whole shaft. 5/16=
Purchased! 
...Because today the plastic top cover fell off my stock shifter! It's a little uncomfortable.
The B&M knob looks bigger and more comfortable, but doesn't look to have a bend to bring it back a little like the hurst. I need that since I'm tall and sit farter back. So this one wins out. Especially on the looks too.
...Because today the plastic top cover fell off my stock shifter! It's a little uncomfortable.
The B&M knob looks bigger and more comfortable, but doesn't look to have a bend to bring it back a little like the hurst. I need that since I'm tall and sit farter back. So this one wins out. Especially on the looks too.
Last edited by Preowner; Aug 7, 2008 at 11:11 PM.
incredibly easy install too, just make sure you mark the cable before you pull the gray clip off, saves you having to adjust everything.
Thank you for all the orders!
All PM's replied!
Everyone who ordered one should have a tracking number already!
Keep the orders coming!
-Karo
------------------------------
More PM's replied!
Thanks everyone!
-Karo
All PM's replied!
Everyone who ordered one should have a tracking number already!
Keep the orders coming!
-Karo
------------------------------
More PM's replied!
Thanks everyone!
-Karo
Last edited by Karo; Aug 8, 2008 at 01:49 PM. Reason: Automerged Doublepost
More PM's replied and all orders placed shipped out.
Keep them coming
-Karo
Last edited by Karo; Aug 8, 2008 at 08:26 PM. Reason: Automerged Doublepost



