JBP

Yup!

Okay guys, the time has come. We're nearing the last couple days of the GB and yes, we can start taking payments. The GB is still on, meaning, if you want to get in on the lowest price that these cams will ever be available at AND get a deal on the valve springs nows the time.

At this point in time, we are taking the remainder payment for the GB. This is what is required of each member.

- Call up JBP (1-416-626-0011) to receive an order number. Have your cobaltss.net user name ready and payment method, for your cams/springs/tools.

Option 2 guys, you will be charged:
Option 2 guys will receive $220CDN/$193USD by cheque when returning their cams immediately to COLT CAMS. Send your old cams to COLT CAMS not JBP. Please use the US or CANADIAN Postal Service and mark the value of the camshafts not more than $75CDN/$66USD please.


Option 1 guys: You will be charged:
Option 1 guys will receive $75CDN/$66USD by cheque, for returning their cams immediately to COLT CAMS. Send your old cams to COLT CAMS not JBP. Please use the US or CANADIAN Postal Service and mark the value of the camshafts not more than $75CDN/$66USD please.


Send old cores back to:

COLT CAMS INC.
#54 - 3347 262nd Street
Langley, BC V4W 3V9
CANADA


Send tool rentals back to:

JBP
44 Wellesworth Drive, Unit #3
Toronto, ON M9C 4P4
CANADA


Lets get this party started!!!

Edubs

Updated:

Need to clarify options:
Option 3) JBP Springs
Option 4) JBP Cam Holding Tool Rental
Option 5) JBP Cam Holding Tool Purchase
Option 6) JBP Chassis Valve Spring Compressor Tool Rental
Option 7) JBP Chassis Valve Spring Compressor Tool Purchase

1. Vman81 - PAID

Just waiting on a bill and shipping confirmation:
1. 97 Z Me Go - PAID (Option 2)
2. DTM2188 - PAID (Option 2, 3)
3. Edubs - ORDERED (Option 2, 3)
4. USMCFieldMP - PAID (Option 2, 3)
5. bamfnss - PAID (Option 2)
6. 1gmfanatik - PAID (Option 2, 3)
7. SororityDemon - PAID (Option 1)
8. Sunfirejoe - PAID (option 2) Would like his cams last so he can pay later
9. uwishuhadmyecotec - PAID (Option 1, 3)
10. CobaltSS422 - PAID (Option 2, 3)
11. NGalaxyTimmyo - PAID (Option 1)

DTM2188

Updated:

Need to clarify options:
Option 3) JBP Springs
Option 4) JBP Cam Holding Tool Rental
Option 5) JBP Cam Holding Tool Purchase
Option 6) JBP Chassis Valve Spring Compressor Tool Rental
Option 7) JBP Chassis Valve Spring Compressor Tool Purchase

1. Vman81 - PAID

Just waiting on a bill and shipping confirmation:
1. 97 Z Me Go - PAID (Option 2)
2. DTM2188 - ORDERED (Option 2, 3)
3. Edubs - ORDERED (Option 2, 3)
4. USMCFieldMP - PAID (Option 2, 3)
5. bamfnss - PAID (Option 2)
6. 1gmfanatik - PAID (Option 2, 3)
7. SororityDemon - PAID (Option 1)
8. Sunfirejoe - PAID (option 2) Would like his cams last so he can pay later
9. uwishuhadmyecotec - PAID (Option 1, 3)
10. CobaltSS422 - PAID (Option 2, 3)
11. NGalaxyTimmyo - PAID (Option 1)

Sorority Demon

damn a little late in the day here. I will definately call up tomorrow.

JBP

Updated:

Need to clarify options:
Option 3) JBP Springs
Option 4) JBP Cam Holding Tool Rental
Option 5) JBP Cam Holding Tool Purchase
Option 6) JBP Chassis Valve Spring Compressor Tool Rental
Option 7) JBP Chassis Valve Spring Compressor Tool Purchase

1. Vman81 - PAID

Just waiting on a bill and shipping confirmation:
1. 97 Z Me Go - PAID (Option 2)
2. DTM2188 - ORDERED (Option 2, 3) SHIPPED
3. Edubs - ORDERED (Option 2, 3)
4. USMCFieldMP - PAID (Option 2, 3)
5. bamfnss - PAID (Option 2)
6. 1gmfanatik - PAID (Option 2, 3)
7. SororityDemon - PAID (Option 1)
8. Sunfirejoe - PAID (option 2) Would like his cams last so he can pay later
9. uwishuhadmyecotec - PAID (Option 1, 3)
10. CobaltSS422 - PAID (Option 2, 3)
11. NGalaxyTimmyo - PAID (Option 1)

Edubs

Interesting...

Is mine shipping too?

CobaltSS422

whats the discounted price for the springs so i can total everything up? and how long do u have to return the cams to colt cams

Vman81

Put me down for option 1 and 3...called JBP today and got my order number. Thanks again guys, I look forward to the power!

Thanks,
Vince.

DTM2188

The valve springs have been discounted to $227 USD. They would like the cams back ASAP, no specific time limit made, but the sooner the better. Not only will you get your refund back quicker, but you will also be helping everyone else get their cams quicker.

Thats odd man, you ordered a little before me, maybe that just forgot to add it to the list.

Updated:

Need to clarify options:
Option 3) JBP Springs
Option 4) JBP Cam Holding Tool Rental
Option 5) JBP Cam Holding Tool Purchase
Option 6) JBP Chassis Valve Spring Compressor Tool Rental
Option 7) JBP Chassis Valve Spring Compressor Tool Purchase

Just waiting on a bill and shipping confirmation:
1. 97 Z Me Go - PAID (Option 2)
2. DTM2188 - ORDERED (Option 2, 3) SHIPPED
3. Edubs - ORDERED (Option 2, 3)
4. USMCFieldMP - PAID (Option 2, 3)
5. bamfnss - PAID (Option 2)
6. 1gmfanatik - PAID (Option 2, 3)
7. SororityDemon - PAID (Option 1)
8. Sunfirejoe - PAID (option 2) Would like his cams last so he can pay later
9. uwishuhadmyecotec - PAID (Option 1, 3)
10. CobaltSS422 - PAID (Option 2, 3)
11. NGalaxyTimmyo - PAID (Option 1)
12. Vman81 - ORDERED (Option 1, 3)

Thanks JBP for getting my cams out so fast!!!! I can't wait to get them installed!

Edubs

You better take good pics DTM!!!

I'm just stoked we're getting them finally. It's been a long wait, but well worth it. As long as I get mine before next Thursday I'm cool. That's when my car goes in the shop. I was just hoping they'd get them to me sooner because my shop has a few openings later in the week...

DTM2188

I'm dropping my car off next Thursday as well for the install. I'm hoping that the people who install might take pics because Iwon't be there , gotta work. But I'm going to take a video and plenty of pics when it goes on the dyno on Feb. 10th! I'm getting the cams, springs, water/meth, and H/E all done next week so I can't wait.

Edubs

I can't wait to see the results!!! Wish I could get tuned too. But I don't think I'll have the money for that for a while.

DTM2188

Are you getting a before and after dyno results? I'm getting the before and after, but my after will be with everything else along with the cams (water/meth, H/E, tune), so I won't be able to get an exact number on what just the cams did as to performance gains.

Edubs

I'm not getting tuned for a while. I have to have my custom exhaust build from the motor back, get 60lbs injectors, install my 2.79" pulley and I think that's about it. I didn't have cams anywhere in the near future, but this was too good to pass up. So now I have to wait to get the exhaust (hopefully this summer) and then the 60's and a wideband after next x-mas prob. That means no tune till next spring unfortunately...

DTM2188

I hear ya man, this was too good of an offer to let slip by. Let us know how your install goes with the cams and I'll be sure to do the same and I'll try to get a video or pictures or both up as soon as I can next weekend.

Sorority Demon

I have my order number, so if you could adjust the list...

Edubs

Updated:

Need to clarify options:
Option 3) JBP Springs
Option 4) JBP Cam Holding Tool Rental
Option 5) JBP Cam Holding Tool Purchase
Option 6) JBP Chassis Valve Spring Compressor Tool Rental
Option 7) JBP Chassis Valve Spring Compressor Tool Purchase

Just waiting on a bill and shipping confirmation:
1. 97 Z Me Go - PAID (Option 2)
2. DTM2188 - ORDERED (Option 2, 3) SHIPPED
3. Edubs - ORDERED (Option 2, 3)
4. USMCFieldMP - PAID (Option 2, 3)
5. bamfnss - PAID (Option 2)
6. 1gmfanatik - PAID (Option 2, 3)
7. SororityDemon - ORDERED (Option 1)
8. Sunfirejoe - PAID (option 2) Would like his cams last so he can pay later
9. uwishuhadmyecotec - PAID (Option 1, 3)
10. CobaltSS422 - PAID (Option 2, 3)
11. NGalaxyTimmyo - PAID (Option 1)
12. Vman81 - ORDERED (Option 1, 3)

JBP

Updated:

Need to clarify options:
Option 3) JBP Springs
Option 4) JBP Cam Holding Tool Rental
Option 5) JBP Cam Holding Tool Purchase
Option 6) JBP Chassis Valve Spring Compressor Tool Rental
Option 7) JBP Chassis Valve Spring Compressor Tool Purchase

Just waiting on a bill and shipping confirmation:
1. 97 Z Me Go - PAID (Option 2)
2. DTM2188 - ORDERED (Option 2, 3) SHIPPED
3. Edubs - ORDERED (Option 2, 3)
4. USMCFieldMP - PAID (Option 2, 3)
5. bamfnss - PAID (Option 2)
6. 1gmfanatik - PAID (Option 2, 3)
7. SororityDemon - ORDERED (Option 1)
8. Sunfirejoe - PAID (option 2) Would like his cams last so he can pay later
9. uwishuhadmyecotec - PAID (Option 1, 3)
10. CobaltSS422 - PAID (Option 2, 3)
11. NGalaxyTimmyo - PAID (Option 1)
12. Vman81 - ORDERED (Option 1, 3)
13. SSKobald - PAID (Option 2)

Edubs

JBP,

Any more shipping out today :fingers crossed:?

JBP

Updated:

Need to clarify options:
Option 3) JBP Springs
Option 4) JBP Cam Holding Tool Rental
Option 5) JBP Cam Holding Tool Purchase
Option 6) JBP Chassis Valve Spring Compressor Tool Rental
Option 7) JBP Chassis Valve Spring Compressor Tool Purchase

Just waiting on a bill and shipping confirmation:
1. 97 Z Me Go - PAID (Option 2)
2. DTM2188 - ORDERED (Option 2, 3) SHIPPED
3. Edubs - ORDERED (Option 2, 3)SHIPPED
4. USMCFieldMP - PAID (Option 2, 3)
5. bamfnss - PAID (Option 2)
6. 1gmfanatik - PAID (Option 2, 3)
7. SororityDemon - ORDERED (Option 1)
8. Sunfirejoe - PAID (option 2) Would like his cams last so he can pay later
9. uwishuhadmyecotec - PAID (Option 1, 3)
10. CobaltSS422 - PAID (Option 2, 3)
11. NGalaxyTimmyo - PAID (Option 1)
12. Vman81 - ORDERED (Option 1, 3)
13. SSKobald - PAID (Option 2)

Edubs

You are the man!!! I am soooooooooo happy. How long does delivery normally take to NY?

Vman81

Should have to money in full by February 9th!!! I can't wait!!!

Thanks again JBP for making this possible!!!

Later,
Vince.

sunfirejoe

iTrader: (1)

yah i need to move some moeny to my CC, i wish you guys would take paypal lol, i have pretty much the full amount in my paypal accnt as we speak, wutever ill move some to my pay as u go cc

1gmfanatik

I should be able to pay for mine this friday. What time you open till JBP?? What time would it be there at about 330pm eastern time stateside??

SSKobald

Ok a quick question....Who the (enter curse here) is making the cams for 2007,2008, 09 ect. Cobalt SS/SC's and what are they made from if GM is stopping the use of cast iron cams? you can't tell me they made every cam for every SS/SC for every year they plan on producing it by the second/third market year? I'm talking to my dealer tomorrow and just seeing if its possible to buy stock cams for the SS/Sc and how much they cost.

It just doesn't sound right....does it? Has someone already thought of this? I'm already committed however tomorrow will decide what option im truely going with. (Payed today with out checking the forum updates first)...