Rebel Front Splitter Insert GB
#51
Member
Thread Starter
Join Date: 03-21-07
Location: Rebel Land
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
This is much higher than the plastic peice it will not hit until you are hitting the front bumper. Unless you like running over curbs. Anyone who can drive a lowered car properly wil have no problems with this.
#52
Platinum Member
Join Date: 03-16-07
Location: Saskatchewan, Canada
Posts: 2,884
Likes: 0
Received 0 Likes
on
0 Posts
that makes sense... wasn't too sure how low that scoop was. Well, wont be jumping curbs anymore! Jokes
#58
Everyone mounts their HE in different locations so creating a universal divider would be impossible. Further reason to make one yourself if you have a HE.
#59
This WILL make the car more stable at speed as well. Basic aerodynamics, the air under the car is moving faster then the car stays glued to the road. My M has this exact same type thing but all the way to the rear end and I can tell you that my car holds the road like its on rails all the way to 175mph.
This is a great idea for you guys!
This is a great idea for you guys!
#64
Platinum Member
Join Date: 03-16-07
Location: Saskatchewan, Canada
Posts: 2,884
Likes: 0
Received 0 Likes
on
0 Posts
i think a rear diffuser is also a good idea, It would be nice to have it so you couldn't really see it like the front diffuser. You could use the vents in the stock body kit to move the air through from the diffuser.
#65
Member
Thread Starter
Join Date: 03-21-07
Location: Rebel Land
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
Thease are all things that we are looking at but they may never get built. Everyone loves to see thease cool things but yet noone seems to want to buy them. It is very expensive to R&D this stuff and then have nobody buy it.
#66
Senior Member
iTrader: (1)
rebel you guys are onto something here... i gotta see what you can come up with for the rear end there si soo much empty space for low pressure to build up ? a ha under the car near the fuel pump and all... hell you could even vent air to the rear brakes with something like this so help those out too. man it could be soo cool
whats good about this product is that it should work on all models of cobalt and redline so you have a bit more of an audience, and how hard is it to bend a pice of aluminum and drive down the street with hptuners on. you guys are obviosly good with metal because i have a metal product from you, and hptuners makes the world easy for everyone who has it to see whats going on and how its going
ha ha now ive given you the design its good to hold the ass end in up to an average speed of 220 so it should hold the cobalt in place ha ha ha
whats good about this product is that it should work on all models of cobalt and redline so you have a bit more of an audience, and how hard is it to bend a pice of aluminum and drive down the street with hptuners on. you guys are obviosly good with metal because i have a metal product from you, and hptuners makes the world easy for everyone who has it to see whats going on and how its going
ha ha now ive given you the design its good to hold the ass end in up to an average speed of 220 so it should hold the cobalt in place ha ha ha
Last edited by freakta; 09-17-2008 at 02:52 PM. Reason: Automerged Doublepost
#67
#68
Senior Member
Join Date: 02-06-07
Location: everywhere
Posts: 837
Likes: 0
Received 0 Likes
on
0 Posts
i asked how to buy it if its not on the website, but you didn't respond. Also, the the first set of pics of it on the car doesn't have the scoop, but the second set of pics do have the scoop? Any reason why that changed after you first gave out the results?
#70
Haz l33t wheelz.
it's called R&D man, they haven't started selling them yet, these are prototypes.
#71
Member
Thread Starter
Join Date: 03-21-07
Location: Rebel Land
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
This is not on the website yet www.rebelautoworxs.ca, This is for the group buy on this site. If you want to purchase PM us your paypal address and we will send you a bill. Like it says on the first post.
I have some pics of how the final product looks on the car! You cant really notice it unless you look for it. The full splitter however will be very visible. PLease excuse my filthy car I have been far to bussy to wash it in far to long
I have some pics of how the final product looks on the car! You cant really notice it unless you look for it. The full splitter however will be very visible. PLease excuse my filthy car I have been far to bussy to wash it in far to long
Last edited by Sales@rebelautoworxs; 09-18-2008 at 01:23 PM.
#73
This is not on the website yet www.rebelautoworxs.ca, This is for the group buy on this site. If you want to purchase PM us your paypal address and we will send you a bill. Like it says on the first post.
I have some pics of how the final product looks on the car! You cant really notice it unless you look for it. The full splitter however will be very visible. PLease excuse my filthy car I have been far to bussy to wash it in far to long
I have some pics of how the final product looks on the car! You cant really notice it unless you look for it. The full splitter however will be very visible. PLease excuse my filthy car I have been far to bussy to wash it in far to long
#74
Member
Thread Starter
Join Date: 03-21-07
Location: Rebel Land
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
This is it. What you get will look just like this. The R&D is done. It works I have the first on my car and have done logs and it drops temps. I put up some old pics because there were all I had at the time but now you have pics of the finished model.
The cutout is 22"x3" and it is at the same level as the bottom of the rads and the front lip. So there is a good chance that it will fit most FMHE's.
The cutout is 22"x3" and it is at the same level as the bottom of the rads and the front lip. So there is a good chance that it will fit most FMHE's.
Last edited by Sales@rebelautoworxs; 09-18-2008 at 01:38 PM. Reason: Automerged Doublepost