clunk noise from front end??
Thread Starter
Senior Member
Joined: 08-14-09
Posts: 2,318
Likes: 0
From: dartmouth, nova scotia,canada
clunk noise from front end??
what happens is ill be driving along and i get a clunk noise form the front suspension but this only occurs when i hit a bump a certain way any ideas would help alot thanks
bump
or could it be that my car is just cold it was -20 celcius tonight
bump
or could it be that my car is just cold it was -20 celcius tonight
Last edited by DEZZIE41; Dec 31, 2009 at 02:30 AM. Reason: Automerged Doublepost
That would be a sway bar end link. Just had it replaced on my car over the summer and have to take it back in yet again to get them replaced AGAIN. Very common for failing on cobalts
Does your car still have warranty? Cuz with it being as cold outside as it is, I wouldn't be messin around with taking wheels off and the what not unless I had a flat and had no choice lol. Either way tho, most dealers will give a free examination to diagnose the problem anyway so that's the route I'd go
Thread Starter
Senior Member
Joined: 08-14-09
Posts: 2,318
Likes: 0
From: dartmouth, nova scotia,canada
the only warrentey i have left is my powertrain but im getting someone to do a GMVIS on the car casue like i said before i bought it the car had been replaced with front to back NEW suspension parts and the car only had 56,000 KMS on it when i got it in hune
Well that sux...I'd still take it to a shop and ask someone to go on a ride along to hear the sound. Cuz in this weather, nobody wants to work on their car outside of a heated shop. Dealers and shops alike almost always do a free ride along to tell you what the issue is. Then, if that's the case, buy upgrades instead of the stock crap again.
Thread Starter
Senior Member
Joined: 08-14-09
Posts: 2,318
Likes: 0
From: dartmouth, nova scotia,canada
well i just found out that the sway bars were replaced in april of 2009 so it still should be warrentey id imagen
this is what i ofund out
04/28/2009 999 01 0 E2141 - LINK OR BUSHINGS, FRONT STABILIZER SHAFT AT CONTROL ARM - 20784688
this is what i ofund out
04/28/2009 999 01 0 E2141 - LINK OR BUSHINGS, FRONT STABILIZER SHAFT AT CONTROL ARM - 20784688
Last edited by DEZZIE41; Dec 31, 2009 at 03:03 AM. Reason: Automerged Doublepost
Thread
Thread Starter
Forum
Replies
Last Post



