FE5 Control arms from CED
FE5 Control arms from CED
Do these come with bushings and ball joints already pressed in?
Cobalt FE5 Lower Control Arm LH 2008 - 2010 25930725
Thinking about getting the ottp bushings. but these would be much easier to install.
Cobalt FE5 Lower Control Arm LH 2008 - 2010 25930725
Thinking about getting the ottp bushings. but these would be much easier to install.
Thanks! Will do.
Also are you running the Koni shocks in the rear? with the FE5 struts w/ pedders up front?
How are they? I am about the order the rear koni shocks with hardcore bar
Also are you running the Koni shocks in the rear? with the FE5 struts w/ pedders up front?
How are they? I am about the order the rear koni shocks with hardcore bar
Last edited by michiganfootball911; Apr 26, 2012 at 12:40 AM.
Thanks. I might as well just order front, rear, and hardcore bar at the same time.
So i have been trying to read up on the koni struts and adjusting them.
Did you adjust the rears? or just leave them set to zero?
Are they softer then stock? I dont really want anything stiffer lol.
So i have been trying to read up on the koni struts and adjusting them.
Did you adjust the rears? or just leave them set to zero?
Are they softer then stock? I dont really want anything stiffer lol.
the rear konis set two turns off full soft you be purrfect. We are working on a revalved front koni, adds about 200 per shock to the price with shipping ugh...but real nice valving I think. Wangspeed and Slowbalt will say when the time comes









Loki's sport red TC has UCR, Harness Bar and full tanks with Pedders. Stealth's bone stock black TC had half tank and nothing else with stock springs.
You can see what I did there. Data being crunched, so I promise to get back to you with details I hope tomorrow....GC are holding things up, Jeff has been great, so moving forward at good speed.
Last edited by Powell Race Parts; Apr 26, 2012 at 07:34 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Jesse
Problems/Service/Maintenance
2
Sep 28, 2015 12:51 PM



Anyways, enough people ask about how to adjust Konis, and advice on what to set them to. Maybe I should make a sticky.
