Lowering my bros cobalt and cant get this bolt out, just keeps spinning but not like its stripped. When I did mine it just ran out with ease. Any ideas?

 

you holding the back down with something?>

 

Impact? I didnt have any problems with mine either. I would say either that end of the say bar link is spinning when you try to loosen it. Hit it with an impact you can rent one from a local auto parts store and its electric if you dont have a compre..

 

Put a set of vice grips on the back side of the bolt. Should help it from spinning. Also try using an air hammer to spin the nut faster then the bolt can spin. Normal problem.

 

I am using an impact lol, there really is no back side, its a plastic end cap thingymajig

 

use a vice grips to grab inbetween the metal bracket and the rubber on the backside

 

ill give it a try thanks

 

if you push the rubber back some you may see a tiny bolt like washer. You should be able to get something to grip that and spin off the nut.