More Powell!
German specs: Goodn'tight.
I'm putting those in tomorrow along with the front CABs
O and BTW
I'm putting those in tomorrow along with the front CABs
O and BTW
yes the control arm bolts through that trailing position bushing hold the cradle /engine assembly to the unit body, VIP. The do wear out, and i fyou have Fe1 contact OTTP for help Josh can help you with parts. GM specs "control arm to rear frame bolts 148 ft. lbs. Control arm to front frame bolts 41 ft lbs" ..."ball joint to control arm steering knuckle nut 37 ft lbs first pass, reverse 3/4 turn, then 37 ft lbs + 30 degrees"; you need to check this specification. PM me for more or pm Maven... good luck
Thread Starter
Joined: 12-23-09
Posts: 12,643
Likes: 7
From: Mt. Pleasant S.C.
Thread Starter
Joined: 12-23-09
Posts: 12,643
Likes: 7
From: Mt. Pleasant S.C.
Same here Kevin. But this weekend is my last chance to put them in before the next SCCA event that I'm going to, so I didn't want to wait with the rears to do the fronts.
I'm pretty sure he has them for LSJ yes.
edit - DUH, Kevin is driving an LSJ, so I'd have to think that yes he does, haha.
I'm pretty sure he has them for LSJ yes.
edit - DUH, Kevin is driving an LSJ, so I'd have to think that yes he does, haha.
Last edited by Sox-Fan; Feb 22, 2013 at 05:10 PM. Reason: Automerged Doublepost
Thread Starter
Joined: 12-23-09
Posts: 12,643
Likes: 7
From: Mt. Pleasant S.C.
That's what I'm hoping for Kevin. My front end isn't worn but it's also not as precise as I would like.
Joined: 09-29-06
Posts: 20,662
Likes: 216
From: Land of Freedom
These, as with any other part ive boughten from John delivers. It literally is a night and day difference on all parts installed from his shop. Was nice too to have had the chance to hang out with Gloria, and him for the day. Really great people, and the amount of knowledge that guy carries.... impressive. Just dont ask him to move his car.....
Thread Starter
Joined: 12-23-09
Posts: 12,643
Likes: 7
From: Mt. Pleasant S.C.
ok, I'll try to remember that. My next Powell piece will be the Oil PCV drainback system. If I keep autocrossing and road coursing I think it'll pay dividends in longevity. I'd like to get the baffled oil pan too.
THey have been getting really big. Last week though they brought their own catering truck, so a couple businesses in the plaza called the cops. And rightfully so. The cops shut down the catering truck but left us alone. We'll see how that goes. They have a facebook page but I didn't notice anything posted on there about whatever went on.
That's what I'm hoping for Kevin. My front end isn't worn but it's also not as precise as I would like.
That's what I'm hoping for Kevin. My front end isn't worn but it's also not as precise as I would like.
