I want to make some custom strut tower bars and was wonering if someone with the DC Sports STB would be so kind as to:

• Trace the left and right mounting area (at the strut tower, one side if they are the same).
• Scan it to a PC
• Email it to me so I can use for a template.

I would really appreciate it

 

i might be able to help later this weekend

 

Thanks.....

 

give me a few minutes and Ill post up some helping pics..






ok,, while the pics upload, from hole A to hole B of the strut bar its 4", from hole A1 to hole A2 its 3 ft and 3.25",, and from hole B1 to hole B2 it 3ft and 8"

the damn pic wont upload... give me a few mins...

here you go...

 

Thanks for the measurements......I wanted to have a pattern to trace. Tracing the pattern will save alot of time. If I can get a pic sent to me via email I will print it off, make the mounting bracket and check the measurements before doing my welding.

 

Please don't forget about me................

 

Cmon.....gotta be someone willing to help...........

 

how bout pictures of it installed..like close up shots

 

damn,, I forgot about you,, let me check if i can draw some specs,, or at least give you some detail measurements

 

mine arrives tomorrow, ill take some high res pics, tape measure, the works

 

Yes,,,Yes....Trace the ends out on a piece of paper and take a pic. I can get it to the right size if it is close. This would be absolutely great.