We need your Feedback
We need your Feedback
Hello Guys;
We would like to know what kind of an experience you’ve had through your dealings with Turbo Wax Products.
Whether it's been good or bad, any feedback lets us know what we should change or keep the same so that we can better accommodate you in the future.
Also what else you could like to see in our site
Thanks again for your support
We would like to know what kind of an experience you’ve had through your dealings with Turbo Wax Products.
Whether it's been good or bad, any feedback lets us know what we should change or keep the same so that we can better accommodate you in the future.
Also what else you could like to see in our site
Thanks again for your support
Personally I love everything about the Turbo Wax System. My car loves it as well! The pre wax cleaner works wonders for the wax.
I’m also a big fan of the tire shine with the applicator. I hate spray-on tire shine because it goes all over your car. The Turbo Wax tire shine is by far my favorite.
As far as the website, perhaps an update with current pictures of Sponsored Rides, events, etc.
Keep up the good work Juan,
I’m also a big fan of the tire shine with the applicator. I hate spray-on tire shine because it goes all over your car. The Turbo Wax tire shine is by far my favorite.
As far as the website, perhaps an update with current pictures of Sponsored Rides, events, etc.
Keep up the good work Juan,
Alright Turbo Wax.....We need a thread just for results.....check this out:
I sent my SC and PCM to INTENSE for their Stage 5. It's been a while and probably won't get it back for a week or so. So I ripped EVERYTHING out of my car. I was going to do a huge How-to for Stage 4+5 installation and interior removal and replacement but, unfortunately, when I went to get my camera (Sony Cyber-Shot 7.2 mega pixel) it was missing from it's case. I later on found it in my sons room...BROKE!! Little upset but got the extended warrenty because I bought it right before I went to the sand-box (IRAQ).
Anyways when I got the HUGE Turbo Wax packages (WOW!! AND THANKS AGAIN) I decided to test it out. I've always been a Armor-All (A-A) fan and had some in my garage. I took my back seat and did half with 3-Amigos (3-A) and half with A-A. I'll describe 3-A.....everyone know what A-A looks like so I'll leave it alone.
THE GOOD STUFF:
I really don't even know where to start to explain the DIFFERENCES!! Initially you can see and smell the difference; 3-A is like a lotion, the smell is almost like a "new car" smell. Rubs on pretty easy and looks amazing! It doesn't make your hands feel all nasty like A-A. I let it set for about a week now. First of all it's usually around 110*F daily so the differences were clearly my decision to never use anything but Turbo Wax!!!!!!!! Looked freshly applied and still smelled like "new car." I removed the residue....I mean A-A, and applied 3-A where the A-A was. You can barely notice a difference from today and last week. One of my friends came over to see what I was doing to the Coby, noticed the seats and he wants to try this on his Dakota R/T. I gave him a plastic baggy with some in it, not enough to do the whole truck though. So when he runs out he'll buy from you T-W!!
The only down-fall of T-W is that it's not sold in stores around here. I can't wait until I can drive my Coby again and see what the outside will look like. I will hopefully get my camera back within the next 2 weeks and I'll take pics. I have been recommending Turbo Wax to everyone out here. So when you get orders from Fort Irwin, Ca 92310. MOST LIKELY they herd of you from me.
Turbo Wax................THANKS AGAIN!! Your product will be around for a while
I sent my SC and PCM to INTENSE for their Stage 5. It's been a while and probably won't get it back for a week or so. So I ripped EVERYTHING out of my car. I was going to do a huge How-to for Stage 4+5 installation and interior removal and replacement but, unfortunately, when I went to get my camera (Sony Cyber-Shot 7.2 mega pixel) it was missing from it's case. I later on found it in my sons room...BROKE!! Little upset but got the extended warrenty because I bought it right before I went to the sand-box (IRAQ).
Anyways when I got the HUGE Turbo Wax packages (WOW!! AND THANKS AGAIN) I decided to test it out. I've always been a Armor-All (A-A) fan and had some in my garage. I took my back seat and did half with 3-Amigos (3-A) and half with A-A. I'll describe 3-A.....everyone know what A-A looks like so I'll leave it alone.
THE GOOD STUFF:
I really don't even know where to start to explain the DIFFERENCES!! Initially you can see and smell the difference; 3-A is like a lotion, the smell is almost like a "new car" smell. Rubs on pretty easy and looks amazing! It doesn't make your hands feel all nasty like A-A. I let it set for about a week now. First of all it's usually around 110*F daily so the differences were clearly my decision to never use anything but Turbo Wax!!!!!!!! Looked freshly applied and still smelled like "new car." I removed the residue....I mean A-A, and applied 3-A where the A-A was. You can barely notice a difference from today and last week. One of my friends came over to see what I was doing to the Coby, noticed the seats and he wants to try this on his Dakota R/T. I gave him a plastic baggy with some in it, not enough to do the whole truck though. So when he runs out he'll buy from you T-W!!
The only down-fall of T-W is that it's not sold in stores around here. I can't wait until I can drive my Coby again and see what the outside will look like. I will hopefully get my camera back within the next 2 weeks and I'll take pics. I have been recommending Turbo Wax to everyone out here. So when you get orders from Fort Irwin, Ca 92310. MOST LIKELY they herd of you from me.
Turbo Wax................THANKS AGAIN!! Your product will be around for a while
Grumbles... that's right I'm going to do all of my seals and everything with TW.
Wow.. that made an amazing difference. Just a month old I was already getting some color fade at the corners where the door closes. And that fixed it right up. Also where my arm rubs against the side of the door. Looks like new now. thanks Turbowax for the great deal!
Wow.. that made an amazing difference. Just a month old I was already getting some color fade at the corners where the door closes. And that fixed it right up. Also where my arm rubs against the side of the door. Looks like new now. thanks Turbowax for the great deal!
Last edited by Grimlakin; Jul 30, 2006 at 03:23 PM.
wow, thank you so much for the test, a great test indeed
I don't know what else to said.
and yes we also apply the 3A to the seals, soon after they look brand new, BUT is not the look is the "Protection"
thanks again
P.S. we are working very hard to get our products in the stores, so not today or tomorrow but is matter of time.
and yes we also apply the 3A to the seals, soon after they look brand new, BUT is not the look is the "Protection"
thanks again
P.S. we are working very hard to get our products in the stores, so not today or tomorrow but is matter of time.
lol, yeah i would like too, its my friends cavi.. i just finished waxing my dads 65 corvette stingray, the pictures are upstairs on my laptop and im having internet problems so i cant post them lol
Originally Posted by SilverBalt
lol, yeah i would like too, its my friends cavi.. i just finished waxing my dads 65 corvette stingray, the pictures are upstairs on my laptop and im having internet problems so i cant post them lol
c' mon, we need to see vett!
alright, i fixed my internet!!! here you go turbo wax@!!1 sorry that there not of the whole car.. i didnt exactly have a nice enviroment for the pictures, i have one where u can kinda see the other car on our life in the garage lol.. but it was in a bad place


very nice thanks!
chipmonk212121
we have "light cut" and "medium cut" compounds, that what we sell to body shops, we also have a marine line, however those products we don't sell to the public yet because we are not set up properly.
so I for now the answer will be no
all do our Swirl remover does take care of very fine scratches.
chipmonk212121
we have "light cut" and "medium cut" compounds, that what we sell to body shops, we also have a marine line, however those products we don't sell to the public yet because we are not set up properly.
so I for now the answer will be no
all do our Swirl remover does take care of very fine scratches.
Sorry for the Shitty quality camera.....my son ebroke my Sony 7.2 megapixel cybershot. After I did the coby, I started to wash and wax my wifes car. I love the way this comes out!!!! I'm getting to drunk to finish her car though.




ill get some pics up later... but after waxing i did notice alot of very fine scratches all over lol... but then i got it under the sun and OH MY GOD does it look good, ive never gotten shine off of any other product... the only problem i noticed was that after the wax was applied i had a VERY hard time figuring out what had wax and what didnt... but all in all it looks awsome... unfortunatly the sun went behind alot of clouds so i cant get a good picture..... tomorrow will be a nicer day oh and TW thanks for the amazing deal and Great CS i have never been happyer with a company over the internet thanks again.... the work will DEFFINATLY be spread with the MN guyz
Originally Posted by Fayzer
ill get some pics up later... but after waxing i did notice alot of very fine scratches all over lol... but then i got it under the sun and OH MY GOD does it look good, ive never gotten shine off of any other product... the only problem i noticed was that after the wax was applied i had a VERY hard time figuring out what had wax and what didnt... but all in all it looks awsome... unfortunatly the sun went behind alot of clouds so i cant get a good picture..... tomorrow will be a nicer day oh and TW thanks for the amazing deal and Great CS i have never been happyer with a company over the internet thanks again.... the work will DEFFINATLY be spread with the MN guyz
I recently used TW on my car and it was very easy to put on and remove and it really brought out the shine. The only problem I had was trying to figure out where I had already waxed, because my car is silver.

I used to use Armor All on the interior, now I've got something new to try! And I really need to try the wheel stuff, I hate the overspray that you get from the spray-on stuff. Thanks.

I used to use Armor All on the interior, now I've got something new to try! And I really need to try the wheel stuff, I hate the overspray that you get from the spray-on stuff. Thanks.
Last edited by 06superchargedSS; Aug 15, 2006 at 11:07 PM.
Thread
Thread Starter
Forum
Replies
Last Post





