CSS Fitment Thread VOL. Stance or GTFO
As much as I was hoping to join the ranks in this thread...it's just not going to happen. I've got my HHR sitting on Ksports...flush drop (no finger gap) but I've decided to not go so aggresive with my wheel setup therefore I don't think I'm going to have the "stance" needed to join the ranks. I've decided on 18x7.5 Enkei EV5 +38 in bronze to offset on my silver wagon. Going to put some 5mm spacers in running 225/40/18 tires. Should come together well I think...hoping to have my wheel and new tires on by the end of the week.
I dropped my HHR in the front at the lowest setting and my base auto didn't like it. Still have a slight vibration (very slight) and I'm guessing that I've got a small amount of axle bind going on.
I dropped my HHR in the front at the lowest setting and my base auto didn't like it. Still have a slight vibration (very slight) and I'm guessing that I've got a small amount of axle bind going on.
this car is rediculously insane. I love it. You have the perfect offset and size wheels, and perfect drop for the street.
What suspension do you run and setting?
The wheels are 18x9 +33 correct?[/QUOTE]
thanks sir I appreciate that
yes they are 18x8.75 basically 9"
+33 no spacer for brembos thank god
bc racing extreme lows fronts can go maybe a half inch lower rears can go another quarter inch
used my h&r sport rear srpings cut a coil off and they ride way better than the bc extreme garbage low springs ever did
What suspension do you run and setting?
The wheels are 18x9 +33 correct?[/QUOTE]
thanks sir I appreciate that
yes they are 18x8.75 basically 9"
+33 no spacer for brembos thank god
bc racing extreme lows fronts can go maybe a half inch lower rears can go another quarter inch
used my h&r sport rear srpings cut a coil off and they ride way better than the bc extreme garbage low springs ever did
Got my Pedders coilovers in about a month ago. Had to pull DD duty last week...the one day it snowed, so stock wheels for now. I'll post pics once my tires arrive for my other wheels. Front is pretty low, but the back may need some brainstorming once the other wheels are on, as they are all the way down with no locking rings. I will say it has settled slightly since this first drive. Wish the redlines had more options, but I suppose the rears are the same as balts so the struts and/or springs could be swapped from any brand if it isn't low enough.
That was back on the stock bottom end and TVS. The car now has a ZZP Gen 3 2.1 with a 6 speed and S259et
Put the stock motor and trans from the red car into my other car and put it back to stock blower, might even run that one this year for *****, prolly like a high 12 @110-111 or so.
Put the stock motor and trans from the red car into my other car and put it back to stock blower, might even run that one this year for *****, prolly like a high 12 @110-111 or so.









