Cobalt SS Network
0 2017/09/18 06:30:34
0 2017/09/18 06:29:09
0 2017/09/18 06:28:58
0 2017/09/18 06:27:02
0 2017/09/18 06:25:15
0 2017/09/18 06:25:08
0 2017/09/16 16:21:52
0 2017/09/16 16:21:17
0 2017/09/16 05:54:34
0 2017/09/12 07:27:50
0 2017/09/12 07:27:47
0 2017/09/11 07:25:24
0 2017/09/08 16:28:27
0 2017/09/08 16:28:19
0 2017/09/06 09:30:43
0 2017/09/03 12:01:47
Picked up this bates hardened oil pump gear for $75. Don't know if it is a good deal or not.
Picked up this bates hardened oil pump gear for $75. Don't know if it is a good deal or not.
0 2017/08/17 19:42:58
0 2017/08/15 13:18:00
0 2017/08/10 10:44:59
0 2017/08/10 10:43:16
0 2017/08/10 10:43:12
0 2017/08/10 10:43:09
0 2017/08/09 10:03:14
0 2017/08/09 10:00:23
0 2017/08/09 09:58:21
0 2017/08/09 06:33:44
Found this picture that is a good visual comparison of H-beam vs. I-beam rod orientation
Found this picture that is a good visual comparison of H-beam vs. I-beam rod orientation
0 2017/08/03 05:20:59
Defroster has a connection like this on each side. Looks like all the strands run parallel from one side to the other.
Defroster has a connection like this on each side. Looks like all the strands run parallel from one side to the other.
0 2017/08/01 15:49:06
0 2017/07/24 16:12:18
0 2017/07/24 16:12:10
I figured out it is this oil cooler is what would go there.
I figured out it is this oil cooler is what would go there.
0 2017/07/14 18:01:57
I need to plug this but I don't know what normally goes here on an lsj block.
I need to plug this but I don't know what normally goes here on an lsj block.
0 2017/07/14 17:20:26
0 2017/07/14 09:21:19
Luckily I was able to extract it with an easy-out of sorts.
Luckily I was able to extract it with an easy-out of sorts.
0 2017/07/13 06:23:04
I got one bolt to actually torque to 74 ft-lbs but the next one snapped off.
I got one bolt to actually torque to 74 ft-lbs but the next one snapped off.
0 2017/07/13 06:22:31
This is how the torque wrench was set.
This is how the torque wrench was set.
0 2017/07/13 06:21:48
It clearly says to torque the upper transmission mount bolts to 74 ft-lb. I may be mistaken but idk what other bolts it could be referencing.
It clearly says to torque the upper transmission mount bolts to 74 ft-lb. I may be mistaken but idk what other bolts it could be referencing.
0 2017/07/13 06:20:44
0 2017/07/12 07:35:07
Have the engine under the car ready to try and line everything up with an air lift on one side and two floor jacks on the other side. It will be a very slow process but should work.
Have the engine under the car ready to try and line everything up with an air lift on one side and two floor jacks on the other side. It will be a very slow process but should work.
0 2017/07/11 07:29:22
Got all this assembled over the weekend. Should be ready to try and line it up and bolt it to the car this evening.
Got all this assembled over the weekend. Should be ready to try and line it up and bolt it to the car this evening.
0 2017/07/10 08:27:46