Cobalt SS Network
0 2016/03/17 22:24:36
0 2016/03/17 22:25:06
0 2016/04/02 22:03:42
0 2016/04/02 22:04:07
0 2016/04/02 22:10:11
0 2016/05/14 05:40:45
pre wash
pre wash
0 2016/05/15 11:03:55
pre wash
pre wash
0 2016/05/15 11:04:12
pre wash
pre wash
0 2016/05/15 11:04:29
pre wash
pre wash
0 2016/05/15 11:04:44
post wash
post wash
0 2016/05/15 11:05:00
post wash
post wash
0 2016/05/15 11:05:17
0 2016/05/15 11:05:33
0 2016/05/15 11:05:49
Application side
Application side
0 2016/05/15 11:10:30
Application side
Application side
0 2016/05/15 11:10:47
0 2016/05/15 11:13:07
application side
application side
0 2016/05/15 11:13:23
no application
no application
0 2016/05/15 11:13:40
0 2016/05/15 11:13:57
0 2016/05/15 11:18:05
application side
application side
0 2016/05/15 11:18:22
no application
no application
0 2016/05/15 11:18:40
no application
no application
0 2016/05/15 11:21:24
application side
application side
0 2016/05/15 11:21:40
0 2016/06/05 16:56:56
0 2016/06/05 16:57:33
0 2016/06/05 16:57:57
Here is the solenoid. Nestled between the wastegate and compressor inlet. I have already removed the connector.
Here is the solenoid. Nestled between the wastegate and compressor inlet. I have already removed the connector.
0 2016/06/11 08:09:35
This is the connector. Notice how short the wires are coming out of the thick loom.
This is the connector. Notice how short the wires are coming out of the thick loom.
0 2016/06/11 08:10:16
This is where the wire breaks. At first, you may not notice this break. I had to untwist the wires and slightly bend it before I found it was broke in half. The pink wire was nearly broken in half too. The insulation kept the wire in place such that it looked fine.
This is where the wire breaks. At first, you may not notice this break. I had to untwist the wires and slightly bend it before I found it was broke in half. The pink wire was nearly broken in half too. The insulation kept the wire in place such that it looked fine.
0 2016/06/11 08:10:33
Now the problem is found, where the hell do you buy a new connector?!? Dealer? Probably too expensive if you can even get them to find it. This plug is a Bosch EV1 style connector. The same connector used for injectors. Very easy item to find. I personally have brand new ones laying around from DIYAutoTune. Love that website. But yes all you need is a EV1 style injector connector.
Now the problem is found, where the hell do you buy a new connector?!? Dealer? Probably too expensive if you can even get them to find it. This plug is a Bosch EV1 style connector. The same connector used for injectors. Very easy item to find. I personally have brand new ones laying around from DIYAutoTune. Love that website. But yes all you need is a EV1 style injector connector.
0 2016/06/11 08:11:09
Soldered and heat shrinked in place. Notice the length added compared to what I cut off.
Soldered and heat shrinked in place. Notice the length added compared to what I cut off.
0 2016/06/11 08:11:25
Here it is completed. Again, the length is much more than stock.
Here it is completed. Again, the length is much more than stock.
0 2016/06/11 08:11:46
0 2017/08/09 05:05:13
0 2017/08/09 05:06:24
0 2017/08/14 02:56:42
0 2017/08/14 02:57:26
0 2017/08/14 02:58:04
0 2017/08/14 02:58:49