Cobalt SS Network
This is where the mount goes is the cobalt
This is where the mount goes is the cobalt
0 2017/08/13 21:45:51
0 2017/08/13 21:45:58
Tapped an threaded with new mount that was refilled with urathane.
Tapped an threaded with new mount that was refilled with urathane.
0 2017/08/13 21:46:04
New axle seals an replaced slave cyl. Mount hadnt been fill yet here
New axle seals an replaced slave cyl. Mount hadnt been fill yet here
0 2017/08/13 21:46:06
Mocking it up to see whats the way an reasure that i can use all the stock lines from the saab also messuring to see if stock oil return fits
Mocking it up to see whats the way an reasure that i can use all the stock lines from the saab also messuring to see if stock oil return fits
0 2017/08/13 21:57:23
Cleaned the motor taped for the oil return wich fit perfect an so did the other lines the only line that had to be cut was the water line that returns to the thermostat housing i cut it at that side an atached a hose to it an use the same t pipe from the other side in the saab
Cleaned the motor taped for the oil return wich fit perfect an so did the other lines the only line that had to be cut was the water line that returns to the thermostat housing i cut it at that side an atached a hose to it an use the same t pipe from the other side in the saab
0 2017/08/13 21:57:28
Painted the motor an heat wraped the manifold so the water pipe from the pump stays as cool as possible i had to turn the pipe a bit so the manifold would clear
Painted the motor an heat wraped the manifold so the water pipe from the pump stays as cool as possible i had to turn the pipe a bit so the manifold would clear
0 2017/08/13 21:57:34
Cleaned the bay an subfram
Cleaned the bay an subfram
0 2017/08/13 21:57:40
Painted the bay a metalic blue an resprayed the subfram
Painted the bay a metalic blue an resprayed the subfram
0 2017/08/13 21:57:42
New gasket for the turbo. I cut the stock 90 from the saab down pipe with the o2 bung an im making it from there found a oem oil feed line that was cut an welded a braided line wich is awsome
New gasket for the turbo. I cut the stock 90 from the saab down pipe with the o2 bung an im making it from there found a oem oil feed line that was cut an welded a braided line wich is awsome
0 2017/08/13 21:57:44
Got it in looking real good
Got it in looking real good
0 2017/08/13 21:57:48
Turbo fit extremly good an still have room
Turbo fit extremly good an still have room
0 2017/08/13 21:57:53
Turbo in. saab manifold in.
Turbo in. saab manifold in.
0 2017/08/13 21:57:59
Using the stock saab charge pipe wich goes under the pan an went straight up still need few more things buts its up an running more info an detailed specs later on
Using the stock saab charge pipe wich goes under the pan an went straight up still need few more things buts its up an running more info an detailed specs later on
0 2017/08/13 21:58:05
No brand bov with all wrinckle black paint
No brand bov with all wrinckle black paint
0 2017/10/04 09:55:07
Working on the catch can.
Working on the catch can.
0 2017/10/04 09:55:22
Need some some air flow. Dont know how i feel about the grill thoe?
Need some some air flow. Dont know how i feel about the grill thoe?
0 2017/10/04 09:55:31
26”x12”x3” intecooler
26”x12”x3” intecooler
0 2017/10/04 09:55:44
New wheel an nuts
New wheel an nuts
0 2018/09/09 06:49:01
New studs
New studs
0 2018/09/09 06:49:09
Sports rear bumper
Sports rear bumper
0 2018/09/09 06:49:13
Toke my old tranny apart an swaped out the dif housing for the new speed sensor also drilled a hole where mu old one went to be able to put it in I could of use the other half of the tranny casing but it was junk b4 I could now the speed work inside the car
Toke my old tranny apart an swaped out the dif housing for the new speed sensor also drilled a hole where mu old one went to be able to put it in I could of use the other half of the tranny casing but it was junk b4 I could now the speed work inside the car
0 2018/09/09 06:49:25
Lip i made from homedepot
Lip i made from homedepot
0 2018/09/09 06:49:37
New 255 walbro i got on some green top injectors in for now got some 80lb fir when i go e85
New 255 walbro i got on some green top injectors in for now got some 80lb fir when i go e85
0 2018/09/09 06:49:46
0 2018/09/09 06:50:09
0 2018/09/09 06:50:22
0 2018/09/09 06:50:30
0 2018/09/09 06:50:39
0 2018/09/09 06:51:03
0 2018/09/09 06:51:12
0 2018/09/09 06:51:15
0 2018/09/09 07:05:32
0 2018/09/09 07:05:40
0 2018/09/09 07:05:52
0 2018/09/09 07:05:55
0 2018/09/09 07:06:08
0 2018/09/09 07:06:17
0 2018/09/09 07:06:19
0 2018/09/09 07:06:33
0 2018/09/09 07:06:56