i want to take the molding strips off the side of my lt, and i was just wondering on how to do it...it looks like its held on by the same 3m tape as the badges, but not sure. can any help me out?

 

i just pulled mine off when i had the 2.2, it left no residue or paint chips. just go slowly, and don't force it. may have to use some goo gone or something similar

 

research debadging... there is a how to on this topic and a video on the best way to debage.

hair dryer and dental floss

 

k, so it iz held on there with the same type of tape?

 

yah its held on by double-sided tape

 

yea i made the how-to thread so search for my threads it should be one of my first threads

 

ok, so i took the bowtie off the back and painted it black and left the chrome around the edges...so what is the best double sided tape to get to place it back on?...also, i was thinking about putting it right over top of the trunk lock, good or bad idea?

 

3m double sided tape from autozone or somin, and yah i think over the lock is a bad idea

 

and goo gone!! but let it sit!! don't get impatient or it will leave scratches!!

 

<<scratched mine on one side taking it off. the molding came off easy, the tape did not...goo-gone did nothing to get the tape off, ended up scuffing the clear coat on one side without realizing it