p0243 - Turbocharger Wastegate Solenoid Control Circuit

Reply Subscribe

Thread Tools

Search this Thread

Oct 11, 2014 | 10:52 PM

#26

BaltNasty

New Member

Joined: 12-23-12

Posts: 87

Likes: 0

From: Iowa

Does anyone know where I can get one of these connectors?

Oct 11, 2014 | 11:29 PM

#27

ssyellow

Senior Member

Joined: 01-20-09

Posts: 4,319

Likes: 0

From: Michigan

Quote:

Originally Posted by taintedred07

Just wanted to update this for any one else having similar issues. Last night the car was on the lift and we tried disconnecting the solenoid from the turbo to swap in a different solenoid and the wires literally fell apart from the connector. So we linked together another connector, cleared the wastegate code, and been boosting fine ever since.

I've been having the problem you mentioned earlier, I'll have to take a look at this. Any pictures of the area where its located at?

Oct 12, 2014 | 09:51 AM

#28

SR Tech

Senior Member

iTrader: (2)

Joined: 03-10-14

Posts: 588

Likes: 13

From: Albany,NY

Quote:

Originally Posted by BaltNasty

Does anyone know where I can get one of these connectors?

I would contact CED, he was able to get me the connector for the hpfp solenoid. Be prepared to pay a bit of coin though.

Any the dealer would have them aswell, but good luck explaining it to the parts guy

Oct 12, 2014 | 11:59 PM

#29

taintedred07

Senior Member

iTrader: (1)

Joined: 11-03-12

Posts: 1,357

Likes: 1

From: Plano, TX

We spliced together the other end of a harness laying around so I could drive home, I'd imagine you could find the connector piece from an electronic store online or something. I don't have a pic, but the little electronic solenoid is pretty much directly under where the intake meets the turbo.

Oct 14, 2014 | 06:53 PM

#30

ssyellow

Senior Member

Joined: 01-20-09

Posts: 4,319

Likes: 0

From: Michigan

Alright, that gives me a better area to look. Thank you.

Aug 3, 2015 | 10:35 PM

#31

Dutchman

Senior Member

Joined: 02-28-10

Posts: 806

Likes: 23

From: Burlington, Ontario

Very interesting, this could be the problem Ive been chasing

May 27, 2016 | 02:29 PM

#32

BurnNrubberSS

New Member

Joined: 07-02-15

Posts: 76

Likes: 3

From: Lakeland,Florida

wastegate solenoid

i am only getting 3.51 volts at the connector for the waste gate actuator solenoid ive replaced it twice with to brand new ones anybody got any advice and is it supposed to get 12v at the connector?