Scythe_Snake goes to Michigan to see ZZP! (Turbo Upgrade Build)
05-23-2010, 09:26 PM
#138
Senior Member
iTrader: (1)
Join Date: 11-05-08
Location: Bolingbrook, IL
Posts: 1,066
Likes: 0
Received 0 Likes
on
0 Posts
dyno sheet was impressive as hell.. saw it. touched it..
blackbaltsw... were you at the meet last night? i dont think i got to meet you. we will be talking soon. i need a tune.
blackbaltsw... were you at the meet last night? i dont think i got to meet you. we will be talking soon. i need a tune.
05-24-2010, 01:14 AM
#139
05-24-2010, 07:08 PM
#141
Senior Member
Thread Starter
Few Days with no Internet = Alot of responses! lol
Holy hell, a ton of responses to give! 
Sorry guys ahd no net for like, 2-3 days, and I just got it back. And I'm here to provided responses, then pics! 
Just to say people love the setup. I went to 2-3 shows with the dyno sheet and setup and people jizzed in their pants! :P I posted the build on another forum or two as well. Thank you all for your support in person and online. After the responses I will get the pics. I'll be going back to ZZP Thursday to get it retuned and then some adjustments on the clutch as well due to some rathe rloud annoying noises its making as well as some random difficulties going into gear:P. Then the balt will be ready!
Any questions about drivability and the like I'll answer them!
Aw sad day. I missed your post bro. I was sitting in the shop for a bit and didn't have net access. 
Well I will be going there Thursday. :P
Refer to the bottom of this post
Yeah man, ZZP does work and they definitely care. They even stayed MUCH later than shop hours finishing my ride to make sure I could get home that night.
The engine will probably respond in a similar fashion, just have to pull the weight a bit more. It will still move.
Yeah I will shoot you a PM bro.
Thansk Tofu! Pics and the like inc!
Soon Shawn! And you got to see it already.
This ^! 2 more days!
Oh dude, the car WILL be at the CED meet 100%. I wanted to get ti finished so I can have it all ready for the meet.
I got it! They're coming! :P
2 hours 50 minutes thank you very much! =P
Banz inc.
Yeah man you were one of the first to see it. And you have a gorgeous LSJ. Be happy with what you have bro.
Thanks bro.
Shut up! I miss the decal in the lower rocker area.
Yeah you could have said something, but I have the sheet scanned anywho lol
Pics and sheet in the next post
Sorry guys ahd no net for like, 2-3 days, and I just got it back. And I'm here to provided responses, then pics! Just to say people love the setup. I went to 2-3 shows with the dyno sheet and setup and people jizzed in their pants! :P I posted the build on another forum or two as well. Thank you all for your support in person and online. After the responses I will get the pics. I'll be going back to ZZP Thursday to get it retuned and then some adjustments on the clutch as well due to some rathe rloud annoying noises its making as well as some random difficulties going into gear:P. Then the balt will be ready!
Any questions about drivability and the like I'll answer them!
Well I will be going there Thursday. :PI love the build and everytime ZZP does an upgrade for someone makes me realize how much they care for the LNF platform and there customers. 
So tempting to be the first HHR SS to have this upgrade done (probably the fasest HHR SS in the country).
ZZP, with the extra 300 lbs of the HHR SS would the 256 respond better with the extra weight being pulled around?
Scythe_Snake if you could shoot me a pm on how much the upgrade is costing you, I'd appreciate it.
I figure it would go 1 of 2 ways, 1.) save up a little more money from the turbo upgrade I was gonna get in the next couple of weeks
or 2.) be crushed and have to "settle for what I can afford
In reality I think I could install the turbo, etc, myself but I'm not sure if I'm ready to dive into a clutch upgrade yet on my new car.
So tempting to be the first HHR SS to have this upgrade done (probably the fasest HHR SS in the country).
ZZP, with the extra 300 lbs of the HHR SS would the 256 respond better with the extra weight being pulled around?
Scythe_Snake if you could shoot me a pm on how much the upgrade is costing you, I'd appreciate it.
I figure it would go 1 of 2 ways, 1.) save up a little more money from the turbo upgrade I was gonna get in the next couple of weeks
or 2.) be crushed and have to "settle for what I can afford In reality I think I could install the turbo, etc, myself but I'm not sure if I'm ready to dive into a clutch upgrade yet on my new car.
The engine will probably respond in a similar fashion, just have to pull the weight a bit more. It will still move.
Yeah I will shoot you a PM bro.
Thansk Tofu! Pics and the like inc!
I got it! They're coming! :P
2 hours 50 minutes thank you very much! =P
Banz inc.
Yeah man you were one of the first to see it. And you have a gorgeous LSJ. Be happy with what you have bro.
Shut up! I miss the decal in the lower rocker area.
Pics and sheet in the next post
05-24-2010, 07:15 PM
#142
Senior Member
Thread Starter
R1concept Rotors:
The big moment for everyone, the engine:
PS - Its really ******* hot out today (94 degrees with a ton of humidty). The valve cover is a flawless Candy Apple Red with Gold/Silver/Red flake in it:
Buddy Polished my Tial 50mm and ECU, mirror finish with some Mothers:
Dumping in an external fashion:
MAF Relocation! w00t:
Dyno Sheet on the new clutch and conservative tune!
Matt says there is a decent amount left in it :
ENjoy everyone! Again thanks for all your support. To all you OG ss.neters, we still got it.
The big moment for everyone, the engine:
PS - Its really ******* hot out today (94 degrees with a ton of humidty). The valve cover is a flawless Candy Apple Red with Gold/Silver/Red flake in it:
Buddy Polished my Tial 50mm and ECU, mirror finish with some Mothers:
Dumping in an external fashion:
MAF Relocation! w00t:
Dyno Sheet on the new clutch and conservative tune!
Matt says there is a decent amount left in it
:ENjoy everyone! Again thanks for all your support. To all you OG ss.neters, we still got it.
05-24-2010, 07:35 PM
#145
Senior Member
Thread Starter
05-24-2010, 07:41 PM
#147
Senior Member
Join Date: 04-15-09
Location: La porte
Posts: 581
Likes: 0
Received 0 Likes
on
0 Posts
05-24-2010, 08:10 PM
#149
Former Vendor
We don't have our silicone couplers in yet. They are supposed to be nearly ready, so hopefully soon.
I didn't notice that I had the same dyno pull loaded twice. After I entered the comments it treated it as 2 pulls. Weird.
I didn't notice that I had the same dyno pull loaded twice. After I entered the comments it treated it as 2 pulls. Weird.
05-24-2010, 09:34 PM
#150
Senior Member
Join Date: 08-24-07
Location: Cincy
Posts: 7,789
Likes: 0
Received 0 Likes
on
0 Posts
yessum
<3 you.
Ryan, your car looks great now. I like.