Calling anybody with a Tuned SS/TC with dyno results!
#1
New Member
Thread Starter
Join Date: 06-28-08
Location: Cincinnati, OH
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
Calling anybody with a Tuned SS/TC with dyno results!
Hey guys, i'm well aware of the numbers associated with the tunes on here but dont see very many dyno sheets. I'm really interested in a tune and am wanting to see anybody's tuned dyno sheets. Most put about 280-305HP and 310-350TQ to the wheel's i'm just looking for the smoothest powerband i can get. I'm really leaning towards either Trifecta, or Physcosteves. Any and all results are appriciated. I am more into street tracks than just 1/4 so i'm wanting a very smooth linear powerband. I plan on staying stock other than just the tune and perhaps charge piping and a downpipe!
Thanks in advance and i look forward to seeing some results!
Scott
Thanks in advance and i look forward to seeing some results!
Scott
#7
Senior Member
Hey guys, i'm well aware of the numbers associated with the tunes on here but dont see very many dyno sheets. I'm really interested in a tune and am wanting to see anybody's tuned dyno sheets. Most put about 280-305HP and 310-350TQ to the wheel's i'm just looking for the smoothest powerband i can get. I'm really leaning towards either Trifecta, or Physcosteves. Any and all results are appriciated. I am more into street tracks than just 1/4 so i'm wanting a very smooth linear powerband. I plan on staying stock other than just the tune and perhaps charge piping and a downpipe!
Thanks in advance and i look forward to seeing some results!
Scott
Thanks in advance and i look forward to seeing some results!
Scott
Tune and mods in my signature. Ignore the torque number the dyno reads 10% low on torque. I made only 236 wtrq stock at 4500 rpms whereas most stock TCs dyno 255-260 wrtq stock at 3500 rpms
#8
New Member
Thread Starter
Join Date: 06-28-08
Location: Cincinnati, OH
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
Wow Terminator, that is a beautiful curve you have there! I take you did your own tune from reading your thread, i wish you were in Ohio haha. How are you liking that Borla exhaust? How does it sound over stock. Thanks!
#9
Senior Member
iTrader: (1)
Join Date: 07-02-05
Location: West Carrollton (Dayton), OH
Posts: 8,725
Likes: 0
Received 2 Likes
on
2 Posts
This is a vid of the dyno pull and grpah of the '08 SS/TC I tuned (owned by proZak) w/ HAHN CAI: http://www.youtube.com/watch?v=PqRlX8D5oOY
#10
Senior Member
Actually I just helped my tuner tune my car. I know how to tune but I dont own HP tuners or a dyno. I had a full dyno and street tune done on my car. took 8 hours total and cost $750 but I think it was worth it. I am going to have one more round of tuning once I get my intercooler on and some adjustments will be made to the intake and exhaust cam tables and timing tables, hopefully I can find another 10-15whp in there. . I am definately pushing the stock turbo to its limits but I dont beat on my car so I am not worried about it.
#11
New Member
Thread Starter
Join Date: 06-28-08
Location: Cincinnati, OH
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
This is a vid of the dyno pull and grpah of the '08 SS/TC I tuned (owned by proZak) w/ HAHN CAI: http://www.youtube.com/watch?v=PqRlX8D5oOY
#12
Senior Member
This is a vid of the dyno pull and grpah of the '08 SS/TC I tuned (owned by proZak) w/ HAHN CAI: http://www.youtube.com/watch?v=PqRlX8D5oOY
#18
Thread
Thread Starter
Forum
Replies
Last Post