2.0L LNF Performance Tech 260hp and 260 lb-ft of torque Turbocharged tuner version.

JRE tuned LNF with HPtuners

Old Aug 26, 2008 | 08:56 AM
  #1  
JANNETTYRACING's Avatar
Thread Starter
New Member
 
Joined: 07-25-06
Posts: 196
Likes: 0
From: Connecticut
JRE tuned LNF with HPtuners

Just got off the dyno, Pretty impressive that you can get 50 hp and 60 lb torque with just a tune

final results were 290 WHP and 312 WTQ


[IMG][/IMG]
Reply
Old Aug 26, 2008 | 09:03 AM
  #2  
06black's Avatar
Senior Member
 
Joined: 08-13-05
Posts: 5,733
Likes: 1
From: the glove
nice work.

please tell me that your AFR line is wrong........
Reply
Old Aug 26, 2008 | 09:06 AM
  #3  
Edubs's Avatar
Senior Member
 
Joined: 05-01-06
Posts: 4,976
Likes: 2
From: West Coast, FL
Sweet, can't wait to see the numbers people start making w/ upgraded hardware...
Reply
Old Aug 26, 2008 | 09:11 AM
  #4  
JANNETTYRACING's Avatar
Thread Starter
New Member
 
Joined: 07-25-06
Posts: 196
Likes: 0
From: Connecticut
Originally Posted by 06black
nice work.

please tell me that your AFR line is wrong........
NO, it is Dead on, this is what these motors want with the Direct injection, the beautiful part is what ever I command it achieves, exactly, these cars use Wide Band O2 Technology.

Any richer and they lose power and blacken the back of the car, DI is a completely different animal.

Still pretty conservative, there was still Zero Knock activity
Reply
Old Aug 26, 2008 | 09:15 AM
  #5  
Edubs's Avatar
Senior Member
 
Joined: 05-01-06
Posts: 4,976
Likes: 2
From: West Coast, FL
Originally Posted by JANNETTYRACING
NO, it is Dead on, this is what these motors want with the Direct injection, the beautiful part is what ever I command it achieves, exactly, these cars use Wide Band O2 Technology.

Any richer and they lose power and blacken the back of the car, DI is a completely different animal.

Still pretty conservative, there was still Zero Knock activity
You going to upgrade all the charge piping and exhaust and have another crack at it Ted?
Reply
Old Aug 26, 2008 | 09:17 AM
  #6  
JPizzle's Avatar
Senior Member
 
Joined: 05-28-06
Posts: 5,790
Likes: 2
From: Tampa, fl
That's pretty good. Was this car stock?
Reply
Old Aug 26, 2008 | 09:18 AM
  #7  
MapOfTaziFoSho's Avatar
Senior Member
 
Joined: 06-11-08
Posts: 1,125
Likes: 1
From: The Mogadishu of the Midwest
Originally Posted by JPizzle
That's pretty good. Was this car stock?
Seems like it from the original post.
Reply
Old Aug 26, 2008 | 09:20 AM
  #8  
JPizzle's Avatar
Senior Member
 
Joined: 05-28-06
Posts: 5,790
Likes: 2
From: Tampa, fl
Yea, that's what I thought... But just wanted to make sure. It seems like a tune, will give you the most bang-for-your-buck. (Besides from like a turbo swap).

50 HP, & 60 lb-ft of Torque is impressive.
Reply
Old Aug 26, 2008 | 09:22 AM
  #9  
Edubs's Avatar
Senior Member
 
Joined: 05-01-06
Posts: 4,976
Likes: 2
From: West Coast, FL
Yeah, my brother is picking up an 09 in a week or so and I told him to screw doing anything else and just get a tune. He'd be set for quite some time. Well, that and the fact that he's 30 and doesn't like dicking around w/ a car under warranty...
Reply
Old Aug 26, 2008 | 09:34 AM
  #10  
JANNETTYRACING's Avatar
Thread Starter
New Member
 
Joined: 07-25-06
Posts: 196
Likes: 0
From: Connecticut
Early this year this car came in for a baseline stock then the customer installed 2500.00 worth of Cold air kit, Front mount intercooler and hard pipes, and a Turbo back exhaust and only gained 3 HP, the computer really does a good job of achieving commanded power.

Needless to say he was very disappointed, since the Vendor whom will remain nameless made all kinds of power claims with the bolt ons.

Now we are just up against the limit of the factory turbo size for Power.

We will have a crack at it with at 3071R someday, but these Blocks are limited to about 325-340 whp so Buyer beware.

Our 3071R Sleeved Cobalt SS/SC TC conversion made 390 WHP 395 TQ with the factory cat and 2.5 exhaust.
Reply
Old Aug 26, 2008 | 09:34 AM
  #11  
Cougarguy's Avatar
Junior Member
 
Joined: 07-24-08
Posts: 411
Likes: 0
From: Dearborn, MI
dude thats awesome!
Reply
Old Aug 26, 2008 | 09:37 AM
  #12  
steddy2112's Avatar
Senior Member
iTrader: (1)
 
Joined: 05-08-06
Posts: 25,520
Likes: 3
From: Newark DE
Same gains as Psyko's tune for the most part.
Reply
Old Aug 26, 2008 | 09:38 AM
  #13  
JPizzle's Avatar
Senior Member
 
Joined: 05-28-06
Posts: 5,790
Likes: 2
From: Tampa, fl
Originally Posted by JANNETTYRACING
Early this year this car came in for a baseline stock then the customer installed 2500.00 worth of Cold air kit, Front mount intercooler and hard pipes, and a Turbo back exhaust and only gained 3 HP, the computer really does a good job of achieving commanded power.

Needless to say he was very disappointed, since the Vendor whom will remain nameless made all kinds of power claims with the bolt ons.

Now we are just up against the limit of the factory turbo size for Power.

We will have a crack at it with at 3071R someday, but these Blocks are limited to about 325-340 whp so Buyer beware.

Our 3071R Sleeved Cobalt SS/SC TC conversion made 390 WHP 395 TQ with the factory cat and 2.5 exhaust.

Say this cusotmer had all of those mods, AND a tune, than tell me, how much would he have gained, from those mods alone.
Reply
Old Aug 26, 2008 | 09:39 AM
  #14  
steddy2112's Avatar
Senior Member
iTrader: (1)
 
Joined: 05-08-06
Posts: 25,520
Likes: 3
From: Newark DE
Originally Posted by JPizzle
Say this cusotmer had all of those mods, AND a tune, than tell me, how much would he have gained, from those mods alone.
Eventually nothing.

The car would have detuned itself to make 260wtq no matter what.
Reply
Old Aug 26, 2008 | 09:40 AM
  #15  
invisible's Avatar
Senior Member
 
Joined: 08-22-06
Posts: 7,591
Likes: 1
From: In a house.
Originally Posted by JANNETTYRACING
Early this year this car came in for a baseline stock then the customer installed 2500.00 worth of Cold air kit, Front mount intercooler and hard pipes, and a Turbo back exhaust and only gained 3 HP, the computer really does a good job of achieving commanded power.

Needless to say he was very disappointed, since the Vendor whom will remain nameless made all kinds of power claims with the bolt ons.

Now we are just up against the limit of the factory turbo size for Power.

We will have a crack at it with at 3071R someday, but these Blocks are limited to about 325-340 whp so Buyer beware.

Our 3071R Sleeved Cobalt SS/SC TC conversion made 390 WHP 395 TQ with the factory cat and 2.5 exhaust.
....................So that means......ss/sc w/turbo conversion > ss/tc
Reply
Old Aug 26, 2008 | 09:42 AM
  #16  
steddy2112's Avatar
Senior Member
iTrader: (1)
 
Joined: 05-08-06
Posts: 25,520
Likes: 3
From: Newark DE
So how is a Gen II ecotec block weaker?
Reply
Old Aug 26, 2008 | 09:45 AM
  #17  
krispy's Avatar
Senior Member
 
Joined: 03-26-08
Posts: 3,420
Likes: 3
From: Somewhere, MI
Originally Posted by steddy2112
Eventually nothing.

The car would have detuned itself to make 260wtq no matter what.
not if the tune is changed

Originally Posted by invisible
....................So that means......ss/sc w/turbo conversion > ss/tc
he said it was a sleeved engine

Last edited by krispy; Aug 26, 2008 at 09:45 AM. Reason: Automerged Doublepost
Reply
Old Aug 26, 2008 | 09:46 AM
  #18  
steddy2112's Avatar
Senior Member
iTrader: (1)
 
Joined: 05-08-06
Posts: 25,520
Likes: 3
From: Newark DE
Read your post wrong

Probably not much tq but help the HP number a bit.

The stock stuff flows pretty well.
Reply
Old Aug 26, 2008 | 09:52 AM
  #19  
JCswoosher2's Avatar
Senior Member
 
Joined: 07-10-05
Posts: 3,482
Likes: 0
From: Douglasville, Georgia
Man these things are going to be abeast
Reply
Old Aug 26, 2008 | 09:54 AM
  #20  
CBodnar's Avatar
Banned
 
Joined: 04-06-07
Posts: 901
Likes: 0
From: New Jersey
embarrassing your car with just a tune almost can beat my car
Reply
Old Aug 26, 2008 | 09:54 AM
  #21  
JANNETTYRACING's Avatar
Thread Starter
New Member
 
Joined: 07-25-06
Posts: 196
Likes: 0
From: Connecticut
Originally Posted by steddy2112
So how is a Gen II ecotec block weaker?
I heard over on the Solstice forums that they are breaking them above 350 whp.

There are guys making around 400 whp but not for long
Reply
Old Aug 26, 2008 | 10:17 AM
  #22  
PimpLay2's Avatar
Senior Member
 
Joined: 04-29-08
Posts: 2,681
Likes: 0
From: Pittsburgh to D.C.
I feel left out ... I want tuned from hptuners... i dont want to buy the ppc.. it seems a little steep in price too me
Reply
Old Aug 26, 2008 | 11:05 AM
  #23  
06black's Avatar
Senior Member
 
Joined: 08-13-05
Posts: 5,733
Likes: 1
From: the glove
Originally Posted by JANNETTYRACING
NO, it is Dead on, this is what these motors want with the Direct injection, the beautiful part is what ever I command it achieves, exactly, these cars use Wide Band O2 Technology.

Any richer and they lose power and blacken the back of the car, DI is a completely different animal.

Still pretty conservative, there was still Zero Knock activity
its supporting that kind of boost at that AFR?

thats just silly!

how much advance (both spark and cam, if you adjusted any of it)
Reply
Old Aug 26, 2008 | 11:13 AM
  #24  
MapOfTaziFoSho's Avatar
Senior Member
 
Joined: 06-11-08
Posts: 1,125
Likes: 1
From: The Mogadishu of the Midwest
Originally Posted by invisible
....................So that means......ss/sc w/turbo conversion > ss/tc

Not for those that want a reliable 260hp and a warranty.
Reply
Old Aug 26, 2008 | 11:17 AM
  #25  
steddy2112's Avatar
Senior Member
iTrader: (1)
 
Joined: 05-08-06
Posts: 25,520
Likes: 3
From: Newark DE
Originally Posted by MapOfTaziFoSho
Not for those that want a reliable 260hp and a warranty.
Thank you for adding such AWESOME input to this thread!


You know something, I now have clairvoyance to understand all things ecotec with your post.
Reply

Thread Tools
Search this Thread

All times are GMT -4. The time now is 06:18 AM.