what are the size of the stock wheel stuts??? i need to get extended ones and i dont know whats the size of the stock ones... can someone help me plis

 

Here is what you want. They pull up hard but they won't break and they are plenty long.

 

12mmx1.50'?? are those extended? how long are ours?

 

whats the nural size of the stocks...

 

I put 52mm length ones in my 08, works great w my stock wheels and my spacers used for the winter wheels.

robk

 

how long are the stuck studs?

 

IIRC they are 42mm long

robk

 

how long are this ones?

NVM i read ir lol!

 

No these aren't extended. I just figured since you asked for extended wheel studs I would show you a pic of some that were stock length. Yea there extended!

The thread length is 52mm and the over all length is 68mm. These are the same thing I use on my cobalt. When you run slicks and spacers you need these. An open ended lug nut and a good impact will pull them up no prob.

 

We sell them here- ZZ Performance

 

if i was gonna run some 3/4 inch spacers would these studs work?

 

3/4" spacers? Why do you need spacers that thick?

 

why do u need longer studs??

 

just do

 

That's a good price. When I did my car I paid 30 a side for studs. Broke one last summer and need to replace them again. Twenty track days pulling them off and putting them on really rusted the **** out of the studs and lug nuts, but the studs still hold up great.

 

You drive your car in the winter cmiller? I guess I didn't realize that. Some of us ballers don't have to do that. LOL JK

 

No I couldn't drive the car right now if I wanted. I had the extended studs for the motorcycle slicks while retaining the brembos lol.

 

Damn thats a great price!!! Wish i woulda found this before i did mine I just purchased some from pepboys and spent $50. Oh well, lol

robk

 

Cobalt & Ion ---> ZZ Performance -direct product link.

 

i need these..but will they be long enough for a 1/2 or 3/4 inch spacer..i beleieve they would be ok for the half inch...right? as they are .39 of an inch longer?

 

Why do you need 3/4 inch spacer?

 

i dont neccesarily need a 3/4 inch spacer half inch would probably do but would those bolts work with the half inch?...and just to flush my wheels