2.0L LNF Performance Tech 260hp and 260 lb-ft of torque Turbocharged tuner version.

p2261 and p2177 problem!

Thread Tools
 
Search this Thread
 
Old Aug 31, 2015 | 11:00 AM
  #1  
reybalt's Avatar
Thread Starter
Member
 
Joined: 07-22-14
Posts: 255
Likes: 0
From: Atl
p2261 and p2177 problem!

Has anyone ever dealt with p2261 and p2177?

One code says im running lean and the other says the system is running lean.

Could a boost leak cause this?
Reply
Old Aug 31, 2015 | 11:33 AM
  #2  
ECaulk's Avatar
Senior Member
iTrader: (6)
 
Joined: 07-19-10
Posts: 26,529
Likes: 841
From: Houston, Texas
2261 is for the bypass valve

2177 is for pulling more than 23% of the fueling <=80% engine load.

What did you mod recently?
Reply
Old Aug 31, 2015 | 01:04 PM
  #3  
reybalt's Avatar
Thread Starter
Member
 
Joined: 07-22-14
Posts: 255
Likes: 0
From: Atl
p2261 and p2177 problem!

Intake. And the hahn charge pipe is still on the car though.
Reply
Old Aug 31, 2015 | 01:28 PM
  #4  
Dipped_Cobalt's Avatar
Senior Member
 
Joined: 04-23-12
Posts: 2,212
Likes: 39
From: Texas
have you gone back to stock, to see if code still comes out?
Reply
Old Aug 31, 2015 | 01:43 PM
  #5  
ECaulk's Avatar
Senior Member
iTrader: (6)
 
Joined: 07-19-10
Posts: 26,529
Likes: 841
From: Houston, Texas
Which intake?
Reply
Old Aug 31, 2015 | 02:30 PM
  #6  
reybalt's Avatar
Thread Starter
Member
 
Joined: 07-22-14
Posts: 255
Likes: 0
From: Atl
p2261 and p2177 problem!

I had the aem c.a.i but switched back to stock.
Reply
Old Aug 31, 2015 | 02:32 PM
  #7  
reybalt's Avatar
Thread Starter
Member
 
Joined: 07-22-14
Posts: 255
Likes: 0
From: Atl
p2261 and p2177 problem!

The misfire code went away and the rpm needle doesn't bounce anymore. Just those 2 codes now
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
turbochargedss2012
2.0L LNF Performance Tech
11
Sep 20, 2023 12:17 PM
yellow dragon
Problems/Service/Maintenance
0
Sep 28, 2015 09:49 PM
Iceberg
Drivetrain
1
Sep 28, 2015 01:31 PM
DocSvensk
2.0L LNF Performance Tech
7
Sep 27, 2015 02:24 PM
Adiaz1ss
Problems/Service/Maintenance
4
Sep 26, 2015 11:51 PM




All times are GMT -4. The time now is 10:57 AM.