I'm just curious to see what everyone has their torque management at with each gear.

 

I have zero torque management because my car would wheel hop in first gear with it on. I had it taken out so now it just spins. Atleast the car doesn't feel like a dog anymore in first gear

 

my ss/sc has it completely gone, my ss/tc has about 40% to save the clutch to ill get a stonger one.

 

Which tune do you have? Any ideas as of hp or tq?

 

Which tune do you have? Any ideas as of hp or tq?

 

there both in the 300+

hptuners custom

 

In the t/c do you have it at 40% in all gears??

 

1-4 5th gear doesnt have any tq management if i remember correctly not 100% but yes threw all gears right now till i put a stronger clutch in

 

Hptuned.. 1st gear at roughly 80% 2nd and up at 99.9% Hp around 300ish, torque at 340ish, at the crank.. only mod to date is muffler delete. Will spin all the way through 1st and 2nd gear; need driver mod to go fast :P

 

ouch im seeing higher numbers than that to the wheels but, its all in the tune nice number thou.

 

bump to see what everyone is else is doing

 

i dont know wats the torque mangament but i have 322whp/365wtq.... if that helps...

 

I have no torque management at all in any gear or rpm. I like to be able to roast my tires off if I feel like it.

 

I left TQ management alone in reverse.

 

I took in out in reverse just for the heck of it and I find it easier to back up. It seems like Less throttle is needed to get it moving.

 

What's Torque management?

0% through all gears. She tries to break loose a lot in 2nd even when I'm just driving normal but it doesn't bother me.

 

Torque management? Sounds boring.

 

TM does stink but im wondering it putting some back in will help my 60ft times on stock tires.

 

Better tires FTW. TM in first will help traction on the stock tires though.

 

i left the tqr mangment on 40% other wise the clutch slips/ so when i get a stronger clutch for the ss/tc then the tqr managment will be 100% gone

 

Do you have any mods other then the tune?

 

Which table on the lnf do you disable torque management?Is it rpm vs gear?