Seriously though man Im sitting here looking at these cai on what I want.... hummmm

 

Little Bit of an update.
We have some intakes in stock now.
Here is one we put on a customers car yesterday.







This intake fits the 07 Models which are a VERY tight fit.

 

Looks good. Nice butterfly on the welds. That 3"? It looks a little small for 3". If so, nice job, you made it look like it's not a tight fit at all...

 

Yes that intake it three inches of Furry!

 

3.5 for a ss/sc id buy it if the price is right

 

You would need to Cut your car up to make it fit.
So no 3.5 Inch, also you would need to rescale the Maff for the 3.5inch pipe.

 

You pretty much have to rescale the MAF for a 3" too once you put a smaller pulley on the blower. It'll throw a P0171 in a heartbeat, lol...

Great lookin' product guys, keep it up!

 

you said it was for the '07... does that mean it might have a problem fitting in a '06 ss/sc?

 

Fit's the 2005/06 as well.

 

How many have you tested? Just FYI, there are slight build variances between vehicles even within model year that could cause issues. Just a heads up. Hopefully you won't have any issues.

 

I would be interested in a nice CAI that didn't always throw codes and actually fit correctly.

The Fujita is big but it makes the fenders bulge. The AEM dosen't throw codes... but it's a freakin metal elbow and a filter.

There are days I'm tempted to head out to the local auto shop and fab my own... I mean it's a couple pieces of pipe with some bends in it... a bracket or two... and a filter. Yet everyone wants to charge $200+ for it... what's the deal?

I recently bought an e-bay intake for my mom's Jeep... fit perfectly... helped out a decent bit with the low end power... no codes... and gained about 3MPG. It cost $40. Sure I had to fab my own bracket to secure it to the engine so it didn't flop around... but that took a quick trip to the hardware store and $10 worth of stuff.

Charging $200-300 for something like that I don't understand. So if you can make something that's good quality for a good price I'd definately be interested.

 

Oh darn, I hope that isn't hard to do.

Even if its a tight fit, thats great work, as long as no CEL's and stuff. Great work. You should have color options with the blue holders, and have an optional emblem you guys could weld on or something. I think that would be pretty cool.

Now we need some videos and some dynos on stock SS/SC's. =) I hope it whines REALLY loud. Drive bys and rev videos please! =)

Great Work Rebel, you're busting onto the scene, and I for one am VERY thankful.

 

3" SS intake screams like you wouldn't believe...

 

****, when the funds are stable again I'm buying one for sure. I have the original Injen version since someone stole my new version wherever it got shipped to and it looks like **** all scratched up and all. That 3" intake will allow the twinscrew to get more air which is something I'd definitely like to see.

 

*orgasms* Why would you tell me that?

Oh yeah...3 inch + ts FTMFW!!!!

 

This looks very interesting.

 

Update Just finished install on 2006 and it fit Fit Perfect. We removed a Mangled JBP Intake the customer had in it and replaced it with ours. It truly amazes me that people spend good money on products that do not fit. Should be some pictures up tonight.

On a side note the customer went for a boot around the block with his new intake. There was a hesitation before with the JBP intake ,that is now gone with ours.
His other comment was damn this thing is wines louder now !!

 

you guys are in canada right?.
Also, what are u guys selling these for?.

 

PMed you.

 

Great news. can't wait for more info

 

Has it been tested in the rain? Reason I am asking is because I had the JBP intake and one of the two things that I didn't like about it was that anytime it rained water would get on the filter and I couldn't drive my car. The filter placement on this intake is very close to that of the JBP. Not saying it will get water on it from around the headlight like mine did but I see it possible.

 

All the intakes are Prone to getting water in them. The inner fender Well has a spot where water gets shot into the space where the intakes are. Little bit of spray foam from the inside works wonders.


Here is what we replaced a ruined JBP intake

 

I like the polished one, would go execllent on a Black car. I am just interested in the price, and you will have my order.

 

The Intakes are Selling for $285.00 with your choice of k@N or Aem dryflow flow filters.
Also you get a choice of Blue Black and red Couplers. for the intakes.
We have a limited qauntity on hand and they are going fast.
Message me If any one is intrersted in purchasing one.

 

Will you be selling them in the future or for mass production?