2.6" Pulley Roll Call
#1
Member
Thread Starter
Join Date: 02-26-05
Location: Fayetteville, NC
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
2.6" Pulley Roll Call
Alright, so I've seen so many roll-calls up here over the year -- now it's time to see for myself....
Who all is part of the 2.6" Pulley Club?? Don't be bashful, say it loud and proud! I'll be the newest addition to the club, so come on' guys, embrace me --! I wanna feel wuvved too
~Saki
Who all is part of the 2.6" Pulley Club?? Don't be bashful, say it loud and proud! I'll be the newest addition to the club, so come on' guys, embrace me --! I wanna feel wuvved too
~Saki
#5
Member
Thread Starter
Join Date: 02-26-05
Location: Fayetteville, NC
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Bad06SS
+1. Very soon we'll have to do a 2.5" pulley/60lb injector club, and then directly following we'll be the "who broke what" role call.
ROFL! How the hell did you max out -- the same way Rob did?
#7
Senior Member
Join Date: 08-19-05
Location: Horseheads, NY
Posts: 3,018
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Bad06SS
+1. Very soon we'll have to do a 2.5" pulley/60lb injector club, and then directly following we'll be the "who broke what" role call.
Lmao we need a user bar for thos clubs
Broke:
THen list parts lol
Wonder if we coul get injector and pulley size user bars tho...would be cool
Dan
#8
Senior Member
iTrader: (1)
Originally Posted by Saki XL
ROFL! How the hell did you max out -- the same way Rob did?
#9
Member
Thread Starter
Join Date: 02-26-05
Location: Fayetteville, NC
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
You can get bigger injectors (42.5# or even 60#'s) from Intense -- they have them there.
Of course you need to tune to run a pulley that small.. Even running a pulley at 2.7 and 2.8 should utilize some sort of tuning to lean out your A/F mixture. Thus we have the MAF Translator as well. Well, I do... these guys might be using other means..
~Saki
Of course you need to tune to run a pulley that small.. Even running a pulley at 2.7 and 2.8 should utilize some sort of tuning to lean out your A/F mixture. Thus we have the MAF Translator as well. Well, I do... these guys might be using other means..
~Saki
#10
Senior Member
iTrader: (1)
Originally Posted by CobaltBurst
where are you guys getting hte bigger injectors from? are you tuning? or just throwing on the smaller pulley/bigger injectors..
#11
Member
Thread Starter
Join Date: 02-26-05
Location: Fayetteville, NC
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Bad06SS
I have a GMPP manifold and Corsa cat-back. I didn't scan, but at the time he was showing being maxed out, I had an identical setup. 42.5's just don't seem to be enough once you have other bolt-ons.
See, I wish I had of predicted this when I made my parts order. I kind of feel like I just bought 42.5 lb Injectors for NOTHING~~!
NEW RECOMMENDATION TO EVERYONE FROM NOW ON.........
If you're going to be running below a 2.7'' pulley, use the 60lb/hr injectors
Waste of money to max out, and now you need bigger injectors within the same month... lol.
~Saki
#12
Member
Thread Starter
Join Date: 02-26-05
Location: Fayetteville, NC
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Bad06SS
INTENSE has 60lb injectors, you HAVE to either have or be tune with HP Tuners once you go to those injectors.
It's too big to be tuned with the MAF-T?
Thread
Thread Starter
Forum
Replies
Last Post