This is like my 3rd one. Okay, I took it apart and went to try to install power (06 SS/SC). And I am just looking at it and I feel like either I am half retarted or I am missing something...

The large box 3 pronged (female) doesn't have any wires for it

The little ride 2 ponged one (will poke the **** out of you) also isnt connected

If pics are needed, please wait a few hours I'll have them posted to give you guys a better picture.

Hopefully this is enough!!!



NEW UPDATE...


Power doesn't solve the problem. It's hooked up to 12v of power, confirmed with multimeter. Took off the red jumper, and it still stays off! Nothing will work. I think I am either missing a wire or it's shot. I don't have anything to connect into the 3 pronged box. Is there supposed to be a cable for that one?!

 

Here is a link to the photo bucket with a picture of the back of the gauge.

http://i1198.photobucket.com/albums/...-18-50_866.jpg


Maybe someone could help me out now!!

 

Just hook up the red wire to a 12v source and take off the red jumper. It won't power up with 12v if the red jumper is still on.

 

So red wire hooks up to power, red fuse looking thing comes off?

 

Ya the red jumper stays on if you are just plugging and unplugging it to the OBD. But take it off when you are hooking it up to a 12v source so it comes on when you turn the key on.

 

Alright. Thanks, I think I can finally get this thing to work tomorrow!

Any advice for Header/DP install? Or is it just like any other header/DP I've done before?

 

Use a hoist lol. What header and DP are you installing?

 

Vibrant

 

Bump

 

The 3 pronged box is for a wideband I believe. So with the red jumper ON, not hooked to 12v and you plug it into the obd it still doesn't come on?

 

When I installed mine it told me in the direction/instructions/manual to take off the red jumper and hook the red wire up to power....

 

Yah power didn't solve it. But it did take out my drivers side headlight! that doesnt look like the Wideband can fit in that 3 pronged slot.

 

Try reading this. It explains everything.
http://aeroforcetech.com/files/Inter...AL_rev_2_7.pdf

 

THANK YOU!!!!! I couldnt find this through Google...IDK why

 

So... I am missing a part of the set up I don't have the 3 mini wire to plug into the back...You don't runt eh red OB2 you run the red on the mini wire...that's why it's not working...Am I correct?