Bad-Mab header
#1
Junior Member
Thread Starter
Join Date: 06-14-07
Location: Groveport Ohio
Posts: 413
Likes: 0
Received 0 Likes
on
0 Posts
Bad-Mab header
What is the best place to order a badmab header. A place that sell a lot of them so that I may get the newest make from them. I just figure that if you get the newest one that they make, it will have better quality than its predecessors.
Cheap Cheap
I just bought the jbp noodle header off of ebay today for 200. Im going to compare the two.
Cheap Cheap
I just bought the jbp noodle header off of ebay today for 200. Im going to compare the two.
#2
Banned
iTrader: (5)
The jbp noodle header is one of the worst headers for our car and badmab shorty is one of the best so not much to compare, BAD-MAB.com is where u can buy them
#3
Junior Member
Thread Starter
Join Date: 06-14-07
Location: Groveport Ohio
Posts: 413
Likes: 0
Received 0 Likes
on
0 Posts
I'm far aware of the speculation around the "noodle" header. Its really just to have it. Kinda like having multiple pairs of shoes.
I really wish the primaries where bigger on the bad mad, I know they're bigger than the JBP header though. I wish somewhere sold a header 1 3/4 primaries with a 3in collector, bolt to stock pattern and was ceramic coated. all this for like 200ish range.......
I guess badmad is as close as it gets.
I would like to know where the badmab header comes from, specifically. Where its made.
I really wish the primaries where bigger on the bad mad, I know they're bigger than the JBP header though. I wish somewhere sold a header 1 3/4 primaries with a 3in collector, bolt to stock pattern and was ceramic coated. all this for like 200ish range.......
I guess badmad is as close as it gets.
I would like to know where the badmab header comes from, specifically. Where its made.
#4
Banned
iTrader: (5)
I'm far aware of the speculation around the "noodle" header. Its really just to have it. Kinda like having multiple pairs of shoes.
I really wish the primaries where bigger on the bad mad, I know they're bigger than the JBP header though. I wish somewhere sold a header 1 3/4 primaries with a 3in collector, bolt to stock pattern and was ceramic coated. all this for like 200ish range.......
I guess badmad is as close as it gets.
I would like to know where the badmab header comes from, specifically. Where its made.
I really wish the primaries where bigger on the bad mad, I know they're bigger than the JBP header though. I wish somewhere sold a header 1 3/4 primaries with a 3in collector, bolt to stock pattern and was ceramic coated. all this for like 200ish range.......
I guess badmad is as close as it gets.
I would like to know where the badmab header comes from, specifically. Where its made.
#7
Supporting Vendor
iTrader: (2)
Join Date: 02-24-09
Location: Burlington, NC
Posts: 433
Likes: 0
Received 0 Likes
on
0 Posts
I'm far aware of the speculation around the "noodle" header. Its really just to have it. Kinda like having multiple pairs of shoes.
I really wish the primaries where bigger on the bad mad, I know they're bigger than the JBP header though. I wish somewhere sold a header 1 3/4 primaries with a 3in collector, bolt to stock pattern and was ceramic coated. all this for like 200ish range.......
I guess badmad is as close as it gets.
I would like to know where the badmab header comes from, specifically. Where its made.
I really wish the primaries where bigger on the bad mad, I know they're bigger than the JBP header though. I wish somewhere sold a header 1 3/4 primaries with a 3in collector, bolt to stock pattern and was ceramic coated. all this for like 200ish range.......
I guess badmad is as close as it gets.
I would like to know where the badmab header comes from, specifically. Where its made.
Thanks,
Brad
#14
Junior Member
Thread Starter
Join Date: 06-14-07
Location: Groveport Ohio
Posts: 413
Likes: 0
Received 0 Likes
on
0 Posts
You obviously don't understand the purpose and benefit of a coated headers, inside and out... lol
OK, so my analogy with shoes and headers sucked *****.
I just just order the badmab btw
OK, so my analogy with shoes and headers sucked *****.
I just just order the badmab btw
#17
Junior Member
Thread Starter
Join Date: 06-14-07
Location: Groveport Ohio
Posts: 413
Likes: 0
Received 0 Likes
on
0 Posts
#21
Junior Member
Thread Starter
Join Date: 06-14-07
Location: Groveport Ohio
Posts: 413
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
z28addiction
Wanted - What to buy - All categories
0
09-28-2015 12:03 AM