I Got a Sponsorship from Design Engineering Inc (DEI) So I figured I would get their Cryo2 System. I got the Full Kit That comes with a 10lb Bottle, The Kits comes with a WOT Switch & a Manual Button plus of course a Arming Switch. It also comes with a 16" X 5" Wand for the H/E & I will be getting the Intake Hookup next! I will have Results of the Cooling benefits within the next week after I get a Chance to Log it with HP Tuners!
I also still have to put my Custom Carpet back in the trunk & Cut it around the Bottle stands! The install to this system is not really that Hard just time consuming to Hide every thing so it Looks Clean, Routing the Lines & Power are the hardest Part!
But anyway here are the pics,








This is a shot of the Stainless Line that I mounted on th side of the subframe makes it nice & neat! Later i will paint them Yellow to match!


I Polished the Wand For the H/E because the H/E fins are Black & that will really make it stand out!


I put the arming Switch & The Purge Button by the Cig Lighter they fit there rather Nice!






Here is the wand Installed & Polished!

 

sweet i have one sitting in the basement waiting to be put on, i'm doing mine inside the intake though

 

Oh, man Lucky! I hope the results are worth it.

What is the retail on a kit like you have?

 

Yea I Decided to go with the Kit & it didn't come with the Intake>> But I will have it real Soon!

The Kit list for $489.00 with 10lb tank & $373.00 For the 5lb Tank!
They have results showing a 9% gain in HP to a N/A Civic, Thats Not bad! But I will tell you what it does with Hp Tuners after i get a chance to scan it!

 

very clean installation. good job!

 

Ty I'll be adding some More pics of it ran out of Daylight!

 

Bump for finished install pics!

 

What exactly does this do?

 

it is supposed to cool ait intake charge temps i think. I was looking into buying this kit, but i wanted to see someone else who was using it, its expecially good with the intercooler sprayer and you have a diff heat exchanger. please when you get the chance post up some proof that this thing works and i think a lot more of us would buy it.

 

This wand is for super cooling the Water Temps in the H/E before going back into the Intake Manifold which in return drops the Air Intake Temps>> Which equals more Power!
The Air intake Hookup before the supercharger I don't have yet but will be getting it before long hopefully for Christmas! That in Return means even cooler temps allowing more air & More fuel whichs equals more Power! I plan in the future of going up in HP & I'm currently running a 2.8, So lets just say I am 1 of the people that don't have to worry about Heat soak! Do to the fact that I am also running the Dual pass endplate w/Option B & a Triple Pass Heat Exchanger setup!
Living in South Florida doesn't allow for to many Cold days so cooling to me is a Must!

 

woah i didnt realize you lived in ft lauderdale, thats cool maybe i can meet up with you one day and go for a ride in the car to see how the kit works

 

I will be logging it with Hp Tuners to see what the Intake temps are with the wand setup & Later be doing it with the Intake Setup which is where I bet we will see a Big drop in Intake air temps with Both setups running! I already have some Logs of Just the dual Pass system I am running so we got a Good Base!

 

tune my car...lol

 

Niceeeeeeeeee!!!

 

Yea No sweat LSJPup Lives right by me 2, We are always working on ours cars over the weekend & you should come to HIN at the Convention center in Miami on the 15th! just give me a PM with a Number & I'll return the Favor!

 

Thats what I figured, thank you for the explanation though. Do you think this a better option over Meth injection?

 

I will let you Know soon!

 

im def going to hin, i have been the past 2 years

 

What a ricer mod!

The install looks like crap too!

 

^ your joking i assume

 

Im pretty sure Alpha is joking

 

Cool>> 3 of us will be in the show, LsjPuP SS/SC, Me SS/SC & Brian SSR!
You wont be able to miss us, But if you are around next weekend just give me a Pm & swing By we will be getting ready for the show!

 

lol, Bill is one of my best buddies and part of our car club, yes I'm joking. If I wasn't I'd be a *****

His car is always flawless and the same goes with this mod. Looks great as always and you know if its on Bill's car it should be on your car.

SO WHY DOESN'T EVERYONE HAVE THIS MOD ALREADY!!!!

Click the link in his sig and buy some crap!

I'm not going?

Who's the one getting the V.I.P. passes for everyone then? lol

 

Why not have both meth and the cry02? We'd see crazy low temps

 

You don't wanna spray too much random crap into your engine. Remember if your spraying something in your engine, that whatever is taking up precious space air and fuel could be occupying. However, if you wanna do what Bill did with the Cry02 cooling the heat exchanger and meth in your intake stream then you could be talking