proper tools. hell. if you really wanted to get even more ghetto with it poke the holes with scissors and buy a tube of RTV and seal the **** out of it.
you don't have 15 mins? hm. take your dress of next time you do something to your car.
Gotta love the nuthuggers.

 

Hey ladies and gentlemen. How do I mount that little metal thing to the car adn the tank? and i HAve a 2nd H/E which hoses do I run where

 

ummm drill holes and screw it in..

 

Now someone is just jealous no one is hugging their nuts.

 

bend it at a 90 to where it will fit against the fender, and the slide things will go in the slots. you run it the same way the stock one comes off

dude, you obviously dont care for it, so get out. im not coming in your threads and pissing all over your stuff. GTFO

 

I love all the haters. I will have HARD PROOF via hptuners log of a TVS car using this mod at the track tonight.

Stu, the little T I am essentially just removing along with the hoses and then replacing? It sounds soo easy I just haven't found the time to look at the car It just sits in the garage

 

LOL nice post edit, you could not do it in 15 min. I will give you 100$ if you make a video of you doing it in that time with all the parts sitting there. Wanna know why I don't have 15 min? cause im late for work already. PEACE.

 

me too. hell ill give him that if he can do it in 30 from start to boxed.

stop thinking so much. you will see once you look at it.

 

lol i love how you have all these people thinking that this is rocket science. halarious. that is all.

 

haha at work hommie not much else to do....... You get your package?

I love the fact that you love it

 

havent been to conway in a couple days, its prolly just chilling on the porch

 

How did you run the hoses from the tank down to the hookups? I see them going down the passenger side, but when I look at mine I don't see where they would fit through, one maybe alongside the washer resevoir. Got a pic? Thanks

 

I think there is a bit of a RLF vs CSS war going on here.

If you dont want this mod, dont get it, and disregard it, really.

Im still bleeding mine out, its working fine though.

 

I seriously have to agree. I have stu's mod and I just recently installed it and not only does it make a hell of a difference cooling wise but there are no problems with it. Which is escentially the best part about it. No leaks, easy installation, and it works like a charm. Definately worth every penny.

 

No RLF hate.. Just DTCD being a complete doucher like normal.

 

lol. yeah. im the douche for pointing out what needs to be.

 

Stu Mod Ftl!

 

Yes basically.. You come into a guys thread starting out as being a complete ********.. If you don't like what he is doing. State it and then leave.. There is no need for you to keep going and keep going.

Just stop. Thats why nobody ******* likes you on RLF..

 

Sorry to tell it like it is.
Guess you guys should all spend 160 on a 30 home job =/.

 

take out the passenger headlight, run right under

you are a moron. it doesnt cost $30. $30 hardly covers the tank and the shipping costs.

 

Ok man where should I start....I guess I will start with the fact you are comparing your product to something that takes more R&D and more equipment to produce. Intakes and exhaust use metal and welding equipment and they also take time to make sure they fit properly. No, in the long run they do cost less than what they sell for and no where did I say you should not be making a profit from the product you are producing. But taking something that costs maybe 60 dollars at the most to fabricate and ship and charging 160 dollars for it. You are making quite a bit of profit for something that you have stated yourself that might leak and might need more sealant to keep it from leaking anymore.

I am in no way bashing your mod...I just find it hard to believe how you can charge people that much money for something that cost so little to make and design. You would think..for the amount of money your selling it you would use a tank that isn't 8 bucks at autozone.

Another thing that I don't understand is the fact that you said by removing the line from the stock filler neck it reduces heat soak...Because isn't that line already coming out of the IC and is heatsoaked and hot already?

 

I'm sorry, I thought this was a free-market society: whereas, you can sell anything you want for whatever price you think you can get for it. If someone wants it bad enough, they'll pay for it.

And the guy even posted a how-to to do it yourself!!! So jeez, end the retardedness

 

seriously, why even care if you are not ganna buy it, MOVE ON.

 

I ought to do something like this. I haven't done anything useful to my car in a while, haha.

 

I'm sorry taht I am trying to look out for others well being...guess I should just stop caring about others getting ripped off...Spend your money how ever you want.