2.0L LSJ Performance Tech 205hp Supercharged SS tuner version. 200 lb-ft of torque.

INTENSE Announces New Dyno Proven Stage Kits!

Old May 18, 2006 | 05:59 PM
  #1  
Bad GTP's Avatar
Thread Starter
Former Vendor
 
Joined: 12-13-05
Posts: 97
Likes: 0
From: Westerville OH
Talking INTENSE Announces New Dyno Proven Stage Kits!

INTENSE Dyno Proven Stage Kits

Here are the highlights (rated conservatively, of course):

Stage 1 = 11 psi boost and up to 235 WHP and 215 WTQ

Stage 2 = 13 psi boost and up to 245 WHP and 230 WTQ

Stage 3 = 15 psi boost and up to 255 WHP and 245 WTQ

Stage 4 = 17 psi boost and up to 265 WHP and 260 WTQ

Stage 5 = 19 psi boost and up to 275 WHP and 275 WTQ

Reply
Old May 18, 2006 | 06:04 PM
  #2  
CobaltSS313's Avatar
Senior Member
 
Joined: 04-03-05
Posts: 1,959
Likes: 0
From: Pittsburgh, PA
i was on there earlier and they didnt have them, they must have just put them up. They are sick a hell.
Reply
Old May 18, 2006 | 06:09 PM
  #3  
CobaltBurst's Avatar
Senior Member
 
Joined: 06-08-05
Posts: 2,152
Likes: 0
From: U.S.A.
does the phase 5 work on 06's? its not listed in the drop down...
Reply
Old May 18, 2006 | 06:10 PM
  #4  
Tomtwtwtw's Avatar
Senior Member
 
Joined: 03-30-06
Posts: 5,489
Likes: 0
From: Chandler, AZ
Very nice.
Reply
Old May 18, 2006 | 06:16 PM
  #5  
Bad GTP's Avatar
Thread Starter
Former Vendor
 
Joined: 12-13-05
Posts: 97
Likes: 0
From: Westerville OH
Please note that we're going to hold off a little bit on the '06 Redline PCM's, since we haven't had the opportunity to dyno tune one yet. With the availability of HP Tuners, any vendor can start shipping PCM's immediately, but the right thing to do is invest the time and money for a custom dyno tuning session first. If you have an '06 Redline with stock airbox and want to volunteer for this, please email me at ScottC@INTENSE-Racing.com.
Reply
Old May 18, 2006 | 06:16 PM
  #6  
FAST06SS's Avatar
Senior Member
 
Joined: 12-07-05
Posts: 964
Likes: 0
From: Indianapolis
Hell of deal!!!!!
Reply
Old May 18, 2006 | 06:18 PM
  #7  
maxpit's Avatar
Member
 
Joined: 12-06-05
Posts: 294
Likes: 0
From: San Diego
What are they using to tune the PCM?
Reply
Old May 18, 2006 | 06:22 PM
  #8  
Bad GTP's Avatar
Thread Starter
Former Vendor
 
Joined: 12-13-05
Posts: 97
Likes: 0
From: Westerville OH
We use a combination of GM SPS, EASE, HP Tuners and our hand-built electronic P.I.M.P. That stands for PCM Interface Module Prototype.
Reply
Old May 18, 2006 | 06:22 PM
  #9  
Blown 4-banger's Avatar
Senior Member
 
Joined: 04-03-06
Posts: 7,570
Likes: 0
From: Mesa, AZ
Well... IM SELLING EVERY THING I OWN EXCEPT MY CAR!!!!!!!!!!!!! I NEED TO SAVE UP 1000 BUCKS AS QUICKLY AS POSSIBLE!!!!!!!!! ANY DONATIONS ARE WELCOME
Reply
Old May 18, 2006 | 06:22 PM
  #10  
CobaltBurst's Avatar
Senior Member
 
Joined: 06-08-05
Posts: 2,152
Likes: 0
From: U.S.A.
n/m i see the 06 now

You’ll want to invest in some sort of scan gauge to monitor KR and have a better understanding of everything when you run this much boost.

and whats a KR? Will you customize the ECM to our current mods, like intake/exhaust/header??
Reply
Old May 18, 2006 | 06:26 PM
  #11  
Blown 4-banger's Avatar
Senior Member
 
Joined: 04-03-06
Posts: 7,570
Likes: 0
From: Mesa, AZ
yeah I wanted to know that too. I know what AFR is but not KR?
Reply
Old May 18, 2006 | 06:28 PM
  #12  
M88ArRamadi's Avatar
Senior Member
 
Joined: 04-24-06
Posts: 1,948
Likes: 0
From: Chester, VA
$1,000?!?......SOLD!! I've waited for this (PCM+higher Stage kit) for too long now. Thanks Guys

KR = Knock Retard
Reply
Old May 18, 2006 | 06:33 PM
  #13  
BlackSS/SC's Avatar
Senior Member
 
Joined: 07-18-05
Posts: 2,130
Likes: 0
From: Canada eh!
KR is short for Knock Retard. The PCM retards the timing when it detects detonation. Can be very bad and wreck and engine quick if it's bad enough. The knock sensor in the engine block is set up to pick up certain noise frequency in the block that could be knock.
Reply
Old May 18, 2006 | 06:45 PM
  #14  
arsenal21's Avatar
Senior Member
 
Joined: 12-10-04
Posts: 1,206
Likes: 0
From: Cleveland, OH
How much would it cost for an install by you guys in Plain City, like Intense Stage 5?
Reply
Old May 18, 2006 | 06:49 PM
  #15  
FLCobalt's Avatar
Senior Member
 
Joined: 07-24-05
Posts: 1,395
Likes: 1
From: florida
awesome to think for $1000 bucks i can have a car almost as fast as an evo.
Reply
Old May 18, 2006 | 06:51 PM
  #16  
FLCobalt's Avatar
Senior Member
 
Joined: 07-24-05
Posts: 1,395
Likes: 1
From: florida
so where are the dynos?
Reply
Old May 18, 2006 | 07:02 PM
  #17  
l Sh1ft l's Avatar
Senior Member
 
Joined: 04-24-06
Posts: 2,191
Likes: 0
From: Canton Ohio
210$ more for 10hp and 15 torque and 2 pci of boost... I'd go w/ stage 4 if it was me.
Reply
Old May 18, 2006 | 07:03 PM
  #18  
Blown 4-banger's Avatar
Senior Member
 
Joined: 04-03-06
Posts: 7,570
Likes: 0
From: Mesa, AZ
Yeah I was lookin for some dyno sheets. Also the cars that were tested, were they stock, or did they have other mods (intake, exhaust ect.)?
Reply
Old May 18, 2006 | 07:04 PM
  #19  
l Sh1ft l's Avatar
Senior Member
 
Joined: 04-24-06
Posts: 2,191
Likes: 0
From: Canton Ohio
I might be a little off today lol but how exactly do these kits work? Whats in them? I clicked and couldn't figure it out.
Reply
Old May 18, 2006 | 07:13 PM
  #20  
plyboy-illest's Avatar
Senior Member
 
Joined: 01-02-05
Posts: 5,183
Likes: 0
From: Toronto (woodbridge)
those are some really kick ass #'s
Reply
Old May 18, 2006 | 07:14 PM
  #21  
BooSSted's Avatar
Senior Member
iTrader: (3)
 
Joined: 11-07-05
Posts: 3,247
Likes: 0
From: Bantario
I am looking at the Stage 4 kit, However I already have the Pulleys and the Oversized Tensioner pulley. I don't need the machined snout either. How much would the kit cost without these items?

All I realy need is:
Injectors
ECU
Wiring Harness
Plugs

What do you use the Supercharger oil for? Just oiling the rotors? or is it used when re-installing the snout?
Reply
Old May 18, 2006 | 07:25 PM
  #22  
BooSSted's Avatar
Senior Member
iTrader: (3)
 
Joined: 11-07-05
Posts: 3,247
Likes: 0
From: Bantario
Quick calculation came out to approx $410 Can you verify that for me! If you can sell it for that price for just those parts I will cancel my GM Stage 1 order and buy this one.

Also, Does your PCM increase the rev limit at all?
Reply
Old May 18, 2006 | 07:42 PM
  #23  
GSoccer24's Avatar
Senior Member
 
Joined: 11-15-05
Posts: 2,693
Likes: 0
From: Newton Highlands, Massachusetts
so the old Stage 3 kit is gone with the wind? dumb question but i assume if i wanted those parts, i could just piece it together, or do you guys not recommend that setup anymore??

just asking, maybe i haven't read enough yet...
Reply
Old May 18, 2006 | 07:45 PM
  #24  
Bad GTP's Avatar
Thread Starter
Former Vendor
 
Joined: 12-13-05
Posts: 97
Likes: 0
From: Westerville OH
so where are the dynos?
We've posted several of them on this message forum in the last couple of days. Tomorrow we'll try to add the respective charts on each Stage page.


How much would the kit cost without these items?
Each of the items in every stage kit is available a la carte. Just click on the link for each item, and you can see the pricing for each.


I might be a little off today lol but how exactly do these kits work? Whats in them?
Each Stage kit has different contents. If you click on the Stage 1 kit, you'll see a list of it's contents, etc.


those are some really kick ass #'s
And they're conservative too.
Reply
Old May 18, 2006 | 07:47 PM
  #25  
Bad GTP's Avatar
Thread Starter
Former Vendor
 
Joined: 12-13-05
Posts: 97
Likes: 0
From: Westerville OH
so the old Stage 3 kit is gone with the wind?
We've replaced it with our new and improved Stage 3 kit.


dumb question but i assume if i wanted those parts, i could just piece it together, or do you guys not recommend that setup anymore??
Yes, you can still piece together anything you want. We offer all the contents of each kit a la carte.
Reply

Thread Tools
Search this Thread

All times are GMT -4. The time now is 12:55 PM.