Anyone know of a place for lifters besides JBP. When I removed my head I found a pretty surprise as to why I blew the motor, basically spring tensions where never checked as I figured they'd hold up for a long while, well the springs caused float at 6k rpms (springs have 24k HARD miles so it's to be expected) well #2 and #3 both lost 1 rocker, and one of the lifter heads was sheared off. Rockers seems fine no damage, cam is being replaced anyway but it had some slight scratching probably when the rockers walked off, but one lifter is down . The damaged was in the most part very minimal, except for that I need to get new springs which is a good thing cause my gf was trying to cut me short on my build even though they were needed now I get more toys. Well thanks for any help.

 

Am I asking a stupid question? lol. But anyways someone must know. Worst case is I'll go to a dealer.

 

hmm, only place i can think of is http://www.crateenginedepot.com

 

bates makes the solid ones. the jbp ones have to be machined down to fit.

 

Appreciate it alot guys . Bates it is. I didn't see lifters for the ecotec on Crateengine though.