hey guys i have my last parts in the mail from zzp for my stage kit and im doin the last part of research for my machinest. I have a 2.9 modular pulley and hub. well he said pulling the stock pulley off is no problem at all. But pressing the hub on is a concern to him because he dosent want to mess up the bearings internaly. will hit hurt the supercharger if he just presses the hub on? Any info will GREATLY help. And to answer later questions i did use the search button and did not find any useful info and i called my three local dealer and all want $150 plus to do the job.

 

no he wont hurt it if its done right, but if done wrong ive heard it can mess up the blower, dont qoute me tho

 

heat pulley up so it slides on easier???

 

bingo...

 

so just heating up the pulley will take that extra pressing force off the shaft?

 

just have your dealer do it.

 

They want to charge me $150 just to swap pulleys.

 

Screw that just heat it up and use a soft hammer to push it inn

 

yeah then say goodbye to your gears. when people say "press on" a hub, or "press on" the stock pulley. they aren't talking about an arbor press or a normal hydrolic press. its a special tool

 

Use a pulley install/removal tool.

I rented mine from ZZP I believe, like 2 years ago for 35 dollars.

Do it. Now.

 

Hmmm I just had my dealer press it on for me and they did it for $75 did you specify to them that you would bring the supercharger in? It took me less than ten minutes to get the supercharger out after I got the belt off.

 

well yeah after the belt all it is is 8 bolts. 4 for the tb and four for the blower itslef

 

Yeah its simple lol

 

Yes i did tell the dealer that i will be taking the supercharger of for them to do this.

 

Thats weird idk y mine did it for so much cheaper