So tomorrow we are painting the blower, I just wanna know what tools are needed to remove the supercharger? Thanks guys

 

small metric socket set.

oh, and some screw drivers.

 

basic tool set should have everything needed.

 

Size of the sockets please.... cuz I will most likely have to buy the tools

Ya we don't have many tools at my house never really did much where we used anything besides screw drivers and hammers lol

 

if you[re going to buy the tools anyways, just get a socket set that has all the different sizes. they're fairly cheap, and you'll have everything you need for the future as well. i picked up a set that has sizes from like 7 to 24, and it was less than 20 dollars.

you can even buy a nice started car set, i know they have them at wallmart for pretty cheap, and it has majority of what you will need to work on your car.

 

Thanks man!

 

you're welcome. if you hae a wallmart you can find them in the car section. look for the one that is a black case with a handle, and the yellow twisty thing to open them up, it's probably laying out open on display. has most tools you will need to get started, and you can build up from there as needed. has a 1/4, 3/8, and 1/2 inch drive wrenches, different size sockets, different screwdrive bits etc.

 

What color did you finally decide on?

 

Actually haven't decided yet lmao. Im going to subway with the gf right now and im going to hit up all the auto stores and chem em all out

Going to go with a flat black with blue ribs

 

Nice, I was gonna punch my grandma if you said straight up blue.

 

Damn that's fucked up lol... I think I want to do blue valve covers too

 

does this have any affect on the performance, or whether or not the supercharger can shed some heat?? If not I want to paint mine!!!

 

^ most people say it doesn't have much or any affect.

 

huh cool, sounds like it good spruce things up alittle under the hood!

 

That's what were going for lol

 

Flat black SC FTW!!!!

 

I sure hope its going to be ftw lol

 

Dude don't forget that he is going to need Metric Allen Bits(i think they are either 5mm or 6mm) to take the four super charger bolts out .... and the bolts for the throttle body are 10mm. You will also need a screw driver for the intake clamp that is on the throttle body. But like most people said, a good basic tool set will do you the trick, plus a case of beer for fun

 

No beer for me

 

Lol sry I even brought it up then lol

 

Naw its all good man no worries. My buddy who is actually doing the painting had a lil too much to drink so that's why there is no beer tomorrow haha. Mike had like 24 beers last night. Damn drunk

 

http://tunersource.gmblogs.com/Racer-Tech/

download chapter 4

 

Ya im on my sidekick, can't download anything thanks tho