Tvs 1900 lsj build
#602
Sourcing ARP bolts for the OEM LSJ rods
should have them within the week I hope
then balance
dunk the bottom end, dunk the head
ASSEMBLE
All this is happening while I work 6 days a week... :/
Still working on sourcing another TVS 1900. In time... need to finish one project first
should have them within the week I hope
then balance
dunk the bottom end, dunk the head
ASSEMBLE
All this is happening while I work 6 days a week... :/
Still working on sourcing another TVS 1900. In time... need to finish one project first
#606
Senior Member
iTrader: (4)
Join Date: 04-08-07
Location: Louisville, KY
Posts: 2,027
Likes: 0
Received 0 Likes
on
0 Posts
It's all good though... Just means that I have more money to spend...lol.. I still need to pay junior to port that head I sent him. Plus the ls4 tb i sent him. Plus I may ask how much he will charge to put a slight polish on that vortech.
#610
I'm sure it could be done...
Your rly not going to make much more HP than a tvs 1320. The only thing that wll go up is torque and parasitic loss
You will only benefit from the larger blowers once the engine is built. Once the tvs 1320 simply cannot produce enough and is being overspun to ****, that's when you bump it.
Majority on here are on stock head with stock valve train. The tvs 1320 will hit a wall on the smaller of its pullies long before you need to upgrade to a larger s/c.
Project is moving along... Trying to source arp bolts for my spare lsj rods. Balance everything and assemble. Everyhing is sitting and waiting.
Your rly not going to make much more HP than a tvs 1320. The only thing that wll go up is torque and parasitic loss
You will only benefit from the larger blowers once the engine is built. Once the tvs 1320 simply cannot produce enough and is being overspun to ****, that's when you bump it.
Majority on here are on stock head with stock valve train. The tvs 1320 will hit a wall on the smaller of its pullies long before you need to upgrade to a larger s/c.
Project is moving along... Trying to source arp bolts for my spare lsj rods. Balance everything and assemble. Everyhing is sitting and waiting.
Last edited by 100% METH; 05-29-2012 at 03:18 PM.
#619
Lol this i know. Is 30gph the lsj record??
I stumbled apon the nitro booster browsing through their site... Its quite a bold claim
http://www.snowperformance.net/nitro-booster.html
I stumbled apon the nitro booster browsing through their site... Its quite a bold claim
http://www.snowperformance.net/nitro-booster.html