2.2L L61 Performance Tech 16 valve 145 hp EcoTec with 155 lb-ft of torque

400WHP ( A Real Dream ??!?)

Thread Tools
 
Search this Thread
 
Old 04-23-2009, 04:20 PM
  #76  
Senior Member
 
crypticscifer's Avatar
 
Join Date: 04-20-08
Location: Where Hoffa remains
Posts: 3,356
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Auddasea
Thread wasn't intended to be a joke really...I don't have 6k to throw at it immediately but I do have about a grand left over every mo after bills...only reason I financed the cobalt is because when I bought it I was working at walmart...is not the case anylonger....whtever guys, was lookin for serious ideas but honestly ind of made me feel like ****...I started the thread off saying I dont know much about cars, this is true....how should a reg person know what kind of car 400hp is attainable on... Ill just do the bolt on **** than... new mani, new intake, exahoust, ecu tune..call it a day...
Don't let these guys get you down.... if it what your heart desires, and it's what you want then do it. But just keep in the back of your mind of the road ahead, your car to near 400np may be rocky let alone above 400hp. I would really suggest trying for lower like 250-300 first. But make sure when you build that, get parts that will work for both your later build and the current (if possible) this way you will not be spending so much $$
Old 04-23-2009, 05:15 PM
  #77  
New Member
 
blak2.2balt's Avatar
 
Join Date: 09-20-07
Location: Miami
Posts: 43
Likes: 0
Received 0 Likes on 0 Posts
Dam I just had to read the first two pages and its funny how people dnt know what they are talking about.
i'm not a expert but first stock motor is been good to me for 270 hp plus cause i havent dyno the car since i up the boost for over 10 month and it still hasn't blown. a SWAP its a waste of money the l61 is a good strong motor. its sad how most of thew people talk down about the 2.2 when if you want to make 400hp you can. with just rods and pistons a good tune with the right gas. just do your homework and don't listen to half the down talkin people on this thread.
Old 04-23-2009, 05:23 PM
  #78  
Member
Thread Starter
 
Auddasea's Avatar
 
Join Date: 07-09-08
Location: Tucson
Posts: 211
Likes: 0
Received 0 Likes on 0 Posts
^^^... I'm going to start with the basics first... My friend from work his dad owns a garage here and town and he can get me a sc to start with for 600.00, including labor, from one of his vendors... I'll have my intake (injen) by the end of next week... And than Im going to work on a whole new exhaust a mani setup which wont run to bad...Im going to talk to my friend about rods and piston heads, see if I can get a better set for a minimal price....Ill just go from there...thanks or the pep talk guys haha
Old 04-23-2009, 05:36 PM
  #79  
New Member
 
blak2.2balt's Avatar
 
Join Date: 09-20-07
Location: Miami
Posts: 43
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Auddasea
^^^... I'm going to start with the basics first... My friend from work his dad owns a garage here and town and he can get me a sc to start with for 600.00, including labor, from one of his vendors... I'll have my intake (injen) by the end of next week... And than Im going to work on a whole new exhaust a mani setup which wont run to bad...Im going to talk to my friend about rods and piston heads, see if I can get a better set for a minimal price....Ill just go from there...thanks or the pep talk guys haha
Yo take your time and do it right the first time it frustrating but well worth the wait. and you spend less money doin it once. believe me i'm on my second setup. if 400hp is your goal go for it its not a dream lol just not cheap.

Originally Posted by 06_ion2
srsly 400hp v8 is sick? maybe 550+hp is sick 400hp v8 is too easy man
lol true you can spit at a v8 and it could make 400hp

Last edited by blak2.2balt; 04-23-2009 at 05:36 PM. Reason: Automerged Doublepost
Old 04-23-2009, 06:45 PM
  #80  
Member
Thread Starter
 
Auddasea's Avatar
 
Join Date: 07-09-08
Location: Tucson
Posts: 211
Likes: 0
Received 0 Likes on 0 Posts
^^where would you start? Just the normal bolt ons and what not??
Old 04-24-2009, 09:08 PM
  #81  
Member
Thread Starter
 
Auddasea's Avatar
 
Join Date: 07-09-08
Location: Tucson
Posts: 211
Likes: 0
Received 0 Likes on 0 Posts
Took the back bench and seats out...weighed 29lbs all together...thats almost a 3hp gain...and I can feel it!! haha lol...
Old 04-24-2009, 09:30 PM
  #82  
Haz l33t wheelz.
 
ls1fbody's Avatar
 
Join Date: 09-14-07
Location: Costa Mesa CA
Posts: 18,891
Likes: 0
Received 3 Likes on 3 Posts
Originally Posted by Auddasea
21 in November Shawn... What really got me started on this is my guy pj at work has a evo lancer pushing 1000 whps and he took me for a spin in it....Knocked my shoes off cause honestly I thought my car was on the faster side seeing how Ive punished some civics, lancers, etc etc..... heh, my ride aint jack about sh** lol
i call shenanigans.
Old 04-24-2009, 09:43 PM
  #83  
Senior Member
 
myfakeevo's Avatar
 
Join Date: 12-20-08
Location: rochester ny
Posts: 1,661
Received 0 Likes on 0 Posts
have you ever had a 200hp car? 300? If you dont have the mechanical skills to maintain or build a vehicle, then you shouldnt be building an agressive motor. Especially with that high of a hp goal, cars break, they break more when you push them past there limits.

or just add stickers. they add hp.
Old 04-24-2009, 09:47 PM
  #84  
Senior Member
 
mrsilent13's Avatar
 
Join Date: 11-16-07
Location: Los Angeles, Ca
Posts: 6,232
Likes: 0
Received 0 Likes on 0 Posts
build it...all these guys telling you not to do it...do it anyway....im shooting for 300whp...im currently sitting somehwere in the 250-270range...not sure...fully built motor...but im taking a break from continuing cuz money is hard to come by on right now
Old 04-24-2009, 09:48 PM
  #85  
Senior Member
 
myfakeevo's Avatar
 
Join Date: 12-20-08
Location: rochester ny
Posts: 1,661
Received 0 Likes on 0 Posts
Originally Posted by mrsilent13
build it...all these guys telling you not to do it...do it anyway....im shooting for 300whp...im currently sitting somehwere in the 250-270range...not sure...fully built motor...but im taking a break from continuing cuz money is hard to come by on right now
im not telling him not to do it, but it seems like he barely knows where the dip stick is.
Old 04-24-2009, 09:51 PM
  #86  
Senior Member
 
mrsilent13's Avatar
 
Join Date: 11-16-07
Location: Los Angeles, Ca
Posts: 6,232
Likes: 0
Received 0 Likes on 0 Posts
hey you got to start somewhere
Old 04-24-2009, 09:53 PM
  #87  
Senior Member
 
myfakeevo's Avatar
 
Join Date: 12-20-08
Location: rochester ny
Posts: 1,661
Received 0 Likes on 0 Posts
Originally Posted by mrsilent13
hey you got to start somewhere
yes, but not this magical 400hp number he is looking for with only a thousand dollars.
Old 04-25-2009, 01:05 AM
  #88  
New Member
 
cobaltracing's Avatar
 
Join Date: 03-25-08
Location: Moncton NB
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by blackbolt89
for real. why not just try to get some nice 200 something WHP with a cheap s/c build. 225 whp will be enough for someone used to driving a slobalt 2.2.

and to think. smacking a bunch of decent cars because they thought you were just a silly N/A 2.2


This Is my prime goal, Nice clean Quick cobalt, lol not a race car but a daily driver, that I can eat some srt-4's and Si's, h22, b20,b18's lol makes my day, 250-280hp with a couple good parts will make you a happy cobalt owner.
Old 04-25-2009, 09:57 AM
  #89  
Senior Member
 
myfakeevo's Avatar
 
Join Date: 12-20-08
Location: rochester ny
Posts: 1,661
Received 0 Likes on 0 Posts
Originally Posted by cobaltracing
This Is my prime goal, Nice clean Quick cobalt, lol not a race car but a daily driver, that I can eat some srt-4's and Si's, h22, b20,b18's lol makes my day, 250-280hp with a couple good parts will make you a happy cobalt owner.
well automatics rob hp, and if your going to constantly be doing neutral drops your going to eat your transmission up, id invest in a manual transmission first, especially since your going be well under 300hp.

then invest in bolt ons, cai, full exhaust, port and polish intake and heads. But none of this is going to help you unless you get a TUNE afterwards. Then spray 50 shot of nitrous. I think you will be more then happy and atleast keep up with a srt4.

Thats basically the best bang for the buck without doing a full motor build.
Old 04-25-2009, 11:04 AM
  #90  
Member
Thread Starter
 
Auddasea's Avatar
 
Join Date: 07-09-08
Location: Tucson
Posts: 211
Likes: 0
Received 0 Likes on 0 Posts
^^ I know enough about cars and as I prev stated my friends dad owns a shop...labor is of no price and I can get any manufact part and after market part at a low low low price....My friend will help with the install....Hes been working with his dad for 6 yrs....has rebuilt enough engines and trannies to bang this job of 400hp out....IM GOIN FoR IT!!

Thats why I earlier suggested an engine swap....my guy just did one on a honda with some upgraded sick engine for 800.00 including all parts and labor...so price is not an issue for me....

Help me out here guys haha!!

Last edited by Auddasea; 04-25-2009 at 11:31 AM.
Old 04-25-2009, 02:35 PM
  #91  
New Member
 
blak2.2balt's Avatar
 
Join Date: 09-20-07
Location: Miami
Posts: 43
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Auddasea
^^where would you start? Just the normal bolt ons and what not??
The way I started was by piecing a turbo kit together. I stated with a wastegate, blow off, and a intercooler. You can start however is more convenient to you just have a goal to achieve and dnt waste your money on useless stuff.

And to tell you the truth im up to like 4000 k but that because i got a new turbo.

Last edited by blak2.2balt; 04-25-2009 at 05:02 PM.
Old 04-25-2009, 02:46 PM
  #92  
Senior Member
iTrader: (1)
 
NWAE Cobalt's Avatar
 
Join Date: 07-27-07
Location: Puyallup, WA
Posts: 17,332
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by HunterKiller89
yea...you're completely wrong. pistons, rods, large turbo, injectors, return fuel system. Done....


ive spent $8k on my car... you never know dude. I plan on putting $5k more into it.
ya, in total (including stereo work and such) ive dropped 6-7k into mine and plan on about 10k more

this is not a cheap way to go, but hey, to each his own
Old 05-23-2009, 05:20 AM
  #93  
New Member
 
Cobalt629's Avatar
 
Join Date: 04-30-09
Location: Maryland
Posts: 102
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by 06SIBLT
I would say do it, just for the hell of it. Or if you have the 6k buy a turbo car, like I did, and put money into that, and keep your car as you dd, then you have a nice project car. People like to screw with my Cobalt, but when I am on the road with my 91 Talon TSI its something else, let me tell you that. 400 whp is a bitch in front wheel drive, hell 310whp in front wheel drive is a bitch. I don't catch traction until 3rd gear.
i know someone with a 500+ whp redline and can hook on street tires. it all depends on the driver.
Old 05-25-2009, 01:26 AM
  #94  
Senior Member
iTrader: (1)
 
tru2nrtt777's Avatar
 
Join Date: 02-08-08
Location: Fayetteville/Linden, NC/Myrtle Beach, SC
Posts: 3,728
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by 06_ion2
planning and having the parts is totaly different man.. lol
I agree but I already have a parts list and alltogether it is gonna cost me about 6k. Right now plans are on the back burner til I am out of college.
Old 05-25-2009, 02:19 AM
  #95  
Senior Member
 
cobaltracrtc's Avatar
 
Join Date: 06-18-08
Location: laguna niguel
Posts: 701
Likes: 0
Received 0 Likes on 0 Posts
if you want 400 go for it because its your car and no one else. plus ive dropped at least 6k on mine but im going for at least 350hp and doing alot of suspension work for touge racing and time attack but it all depends on what you want to use it for. if you want to go head to head go on craigslist they usually have some cheap cars that you can sup up really quick like my lil bro got a supra for 800 he is waiting on me to drop in his 7mgte with a t04 turbo and he will be keeping up with at least 300-350hp cars
Old 05-25-2009, 02:22 AM
  #96  
Senior Member
 
06_ion2's Avatar
 
Join Date: 12-12-06
Location: minnesota
Posts: 2,904
Received 2 Likes on 2 Posts
Originally Posted by tru2nrtt777
I agree but I already have a parts list and alltogether it is gonna cost me about 6k. Right now plans are on the back burner til I am out of college.
you wont make 400whp on 6k man sorry. im at 9k and i should make just over 400
Old 05-25-2009, 02:48 AM
  #97  
Senior Member
iTrader: (1)
 
tru2nrtt777's Avatar
 
Join Date: 02-08-08
Location: Fayetteville/Linden, NC/Myrtle Beach, SC
Posts: 3,728
Likes: 0
Received 0 Likes on 0 Posts
Well considering I have never paid retail and have always done my own work... It isnt that hard. Hell I got a spare L61 for $50.
Old 05-25-2009, 02:57 AM
  #98  
Senior Member
 
06_ion2's Avatar
 
Join Date: 12-12-06
Location: minnesota
Posts: 2,904
Received 2 Likes on 2 Posts
Originally Posted by tru2nrtt777
Well considering I have never paid retail and have always done my own work... It isnt that hard. Hell I got a spare L61 for $50.
i got everything at cost.
Old 05-25-2009, 05:08 PM
  #99  
Senior Member
iTrader: (1)
 
tru2nrtt777's Avatar
 
Join Date: 02-08-08
Location: Fayetteville/Linden, NC/Myrtle Beach, SC
Posts: 3,728
Likes: 0
Received 0 Likes on 0 Posts
But do you do your own work? Parts are normally not even 1/3 of labor.
Old 05-25-2009, 05:47 PM
  #100  
Senior Member
 
burzumaske20's Avatar
 
Join Date: 03-26-08
Location: north aurora
Posts: 603
Likes: 0
Received 0 Likes on 0 Posts
for 6k,you can get a fox body mustang for at least 2 to 3grand.Then you take the other 3grand supercharge it or twin turbo set up.you will make over 400whp for sure.


Quick Reply: 400WHP ( A Real Dream ??!?)



All times are GMT -4. The time now is 01:37 PM.