hey everyone, im new to the site i have a 2007 2.2 and its bone stock. im looking for and exhaust and i stumbled upon the jdm SRS catback on ebay. has anyone put this on their car? my best friend has an integra that had this SRS JDM exhaust and it was loud and sounded good. any opinions?

 

Knock-off of the ARK GRiP..

Clearly.

I wouldn't even bother, it's probably made of ******* pot-metal.

 

Hello Pittsburghcobalt !

I bought the SRS Catback exhaust system and it is made of full stainless and doesn't make a too huge sound like we see on Honda Civic that only put a big 4inch Muffler and rev their car all the night.

The performance gain is not too bad and no police look at me.

The most thing I like is that the exhaust system stai bright each time I wash my car.

If you don't want to pay 600$ to 800$ for an exhaust system, go for it and you won't regret !

You can see the sound of my exhaust on my videos on http://chali.monchar.com (The yellow car)

____________________________________________
Cobalt 2.2L 2007
Trifecta Tuned, Cold Air Intake Injen, 2.4L Intake Manifold, GMPP Extruded Exhaust Manifold, SR*S CatBack Exhaust, Lightweight Cranskaft and Alternator Pulley, SS/SC Downpipe, Fidanza Short Throw Shifter, Mag RTX Speed5 17po, Pneus Nankang Sport NS2 215/45/r17
Http://Chali.Monchar.Com

 

^your exhaust is touching your bumper, a no no, and it looks like ass. a no no as well

 

ur exhaust needs to be lowered (not touching your bumper) and centered in the cut-out for the exhaust

 

Okay then, is there anything else I don't know about my exhaust system ? I Don't think that it's your problem if my exhaust is not centered to the exhaust hole and if it's not lower from the bumper.

Instead of talking about the problem I had with the installation of my exhaust you can maybe help him for choosing a better exhaust than mine.

In my case, I love the sound and the performances are very well

Sorry to try to help him to choose an exhaust with the experience I had

 

Welcome to the site. Are you sure you want to put something "JDM" on your car? In case you are a car noob JDM means Japanese Domestic Market.

 

im not saying the exhaust is bad i have no experience with it is very well could be a good cheap exhaust. i told u about lowering it cuz i have seen someone on here have there bumper get melted from the exhaust touching there bumper and i said to center it cuz it would look 100x better. just trying to help u not get a melted bumper sorry.

 

Sorry Sport08 Ive just got a rought day hehe the picture has been taken when I was correcting my rubber that retaining the exhaust because they were too small. So now it's correct. I just hadn't any time to take new pictures.


Sorry to be noob but JDM or not my exhaust is in stainless steel and it is still shining when I wash my car. I don't care if it is made by Japan or China or anywhere from the earth.

 

No its not that it may be made in japan, its the fact that they call it JDM but its for an american car which is ******* retarded. Go to ebay and look up parts for a Cobalt and sometimes you'll see people selling stuff labeled "JDM" just to prey on naive kids.
Like these "JDM" headlights
http://cgi.ebay.com/ebaymotors/2005-...ht_4267wt_1166
Or this set of "JDM" springs http://cgi.ebay.com/ebaymotors/05-06...ht_4597wt_1166
Its all knock off ebay garbage.

But to the OP if you want to get an exhaust that is fairly affordable just try to find a used GMPP catback.

 

Or a Tsudo which is similar. I have that on my car and I love it, there is a huge thread somewhere in General Cobalt where you can hear people's vids. Here are a couple of mine:

 

The Tsudo N1-Catback system is the old model of the SR*S Catback System so in fact it's the same exhaust.

 

Mine is not the N1 the N1 came wirh a 4.5" tip, mine has a 3.5" tip.

 

jdm ftw