i think $70 is way too much for that but anyways good luck and take some pics so we can see what it looks like

 

subd for pics

 

here you go guys i drilled the new hole one just go in so im thinking the extra holes im gonna weld up and re powder coat. its a bit of work to do but i just want it to perfect. so guys is it worth the moeny maybe not but will this mean ill be the only guy on here with it... possibly so its worth it to me to be different

 

not to bad lookin

 

i think i'm going to hold off for a better solution, why pay that much for something that your going to have to basically redo and repowdercoat... but it does look good, its better than not being covered.

 

i think if i can get this one worked out i might try to reproduce it and sell them if it works out like i plan but who knows

 

i really don't see how you would profit much from that, buying it from them just in stainless is 70 bucks, then your going to have to measure and drill it weld the other holes closed sand it back down, then take it for powdercoat, so your looking at like 10 - 20 bucks to get it powdercoated. 90 bucks would be your price, and then i'm sure you would want to charge more so you make a profit, so lets say you charged 30 bucks for labor which i'm sure you would want more, but hypothecially then your looking at 120, i dunno how many people on here would pay 120 minimum for this product... similar prodcuts like this at mrz performance are 65 bucks not powdercoated, sure yours would look better, but i just don't know if it'd be word the 55 bucks more.

now if you didn't anything but satisfaction out of it the cheapest you could get out is 80 - 90 bucks and i still dunno how many people would pay that.

i guess those that want ultimate custom job maybe.. not trying to kill your idea, just trying to be realistic about it... then who knwos people may read this and go ya i'd pay 120 for someone else to do the legwork...

so maybe those that read this post up what you would think would be a good price give the guy soem profit as well what would you pay for it?

 

naw if i reproduce im gonna make it totally from my own metal... around the coil pack openings might not be all rounded out but more square but still be a coil cover ya know

 

I think i saw a better looking one from MRZ but i could be dreaming. Does look nice to get the plastic off, would be a good summer piece for sure.

 

MRZ does make one -- and it sits up taller than this one. I think it would look better on a 2.4 -- or 2.2 that has VVT because the camshaft solenoids fill in the open area. I do like the way it sits inside the VC rather than on top of the VC like the MRZ one does.

 

the one from mrz is ugly... now if you could reproduce this that would give you the best profit.

 

i think in the summer i might make one just to see how difficult it would be but does anyone have a pic of the mrz one installed?

 

its on their website...



ugly imo

 

http://mrzperformance.vstore.ca/prod...roducts_id/133
I like this one more.

 

wow im not really feeling that one but i guess what i got is pricey but since im the only one iwht it i guess its worth it to be unqie and try something for the guys of css

 

i just showed a picture of that one above...

i personally think it looks like ****, look like your motor has a tumor with that one there... and besdies that you can't get it without the ss logo... i'm a 2.2 don't have a ss and didn't want a ss.

 

This product is made for the 2.4 witch is only in the SS Cobalt. We wanted to make one for the 2.2 as well but there was not mutch interest for this product. A design that looks perfect is impossible to acheive on these engines because of the coils being very high over the valve cover. 2 options here, either you see the coils, witch is pointless since this is supposed to be a coil cover and there is no romm for a emblem... or you cover the coils and get a cover that stick higher but you can put a design in there. We tested the 2 option here before making them and the best looking was the cover that hide coils and, cam actuators, and all the wiring of the 2.4...

If you guys want to have one made for the 2.2 just let us know and we can do something for you...

 

can u make one like the ddm works but better pricing and better fitment for the 2.2?

 

if we can get some interest we'll make them for sure

 

i don't care that the top of the coil packs show, but int he dmm works one it covers most of it just the tops show i'd buy one if you could make it like that... its for aesthetics anyways.

was wasn't trying to be rude or mean, i like the cover you guys did for the other version just not that one.

 

ok guys i've decided im gonna sell my coil cover, the only thing ive done to it is the drilled hole, i havent modded it any other way, 85 shipped or obo

 

wtf?y u selling it now? i could be interested in takin it off ur hands

 

im lookin into buying a disel 2500 chevy truck, so iwont be needing it, just gonna go all stock on the car and trade wit hte guy