So for all you who have that ugly glow in your high bean such as this...



Check you lights first. A few days ago i realized that when i took out my driver side headlight housing that the passenger side worked perfectly. So after checking the pongs in the dirver side and everything was straight realized that the wiring was incorrect from the factory.

Looking here the layout left to right is Orange, Black and Pink.



This is the corret way for the grey connector to be setup

https://www.cobaltss.net/gallery/fil...6/IMG_4254.jpg

What they did...



So just make sure that the left most wire of the grey connector (black wire in my case) is connected to the high beam light.




Again. make sure to test and see which headlight housing works when the other one is out. if one works correctly (i.e. high beam off, low beam on and vice versa) then follow that setup.

Hope this helps you all. Also now both low beam are the same strength. (B 4 driver low beam was duler than passenger).

Finished product...

 

nice job man. hopefully this will help out others with the problem

+1 rep

 

looks good! i hope mine dont have that glow, i have never really looked! thanks tho

 

BINGO, and everyone told me i was crazy... i knew i was right