Suede Seats Installed
#1
Senior Member
Thread Starter
Join Date: 03-09-06
Location: "The Valley"-California
Posts: 2,425
Likes: 0
Received 0 Likes
on
0 Posts
Suede Seats Installed
So I finally got aronud to taking pictures of my new seats, they were taken on a cell phone sorry. They are NR>G Type R Suede Seats, NR>G Harness Bar w/ 4pt Harness's, and wedge engineering seat brackets. Thank you James and Mike at NR>G, and Lyndel at Wedge engineering. Upside, the side of the seats are much higher and firm, they hold you in great and feel extremely comfortable. Downside, probably hard to clean if I spill something, and you can't retain factory belts, I'm going to try to mount something. Enjoy
Many also ask for a pic of how the harness bar was attached, so I pictured that as well. I'm going to cut the side panels so I can put them back in.
Many also ask for a pic of how the harness bar was attached, so I pictured that as well. I'm going to cut the side panels so I can put them back in.
#3
Senior Member
Thread Starter
Join Date: 03-09-06
Location: "The Valley"-California
Posts: 2,425
Likes: 0
Received 0 Likes
on
0 Posts
depends how big they are haha, but not easy, I don't take any passengers anyways cause I'm a neat freak....also even if they did fit I wouldn't feel comfortable with them sitting there with a bar right in front of their face haha. Back seats will be coming out shortly.
#6
Senior Member
Thread Starter
Join Date: 03-09-06
Location: "The Valley"-California
Posts: 2,425
Likes: 0
Received 0 Likes
on
0 Posts
they feel awesome, great for daily driving. I thought they would be kinda hard to move around in, but the suede is nice and smooth, similar to a stock STI seat, or IS300 seats...very comfortable.
Last edited by juststickit124; 02-12-2009 at 02:42 PM. Reason: Automerged Doublepost
#17
Senior Member
Thread Starter
Join Date: 03-09-06
Location: "The Valley"-California
Posts: 2,425
Likes: 0
Received 0 Likes
on
0 Posts
yes they are type-r. give them a call, this is a new product and haven't put it on their site yet. You can ask for Mike and tell him the guy with the orange cobalt from So Cal referred you. Might get you a better deal, but can't promise anything, especially since it's going to have to be shipped
#18
Haz l33t wheelz.
when you get the plastic back on, make sure to send me a picture, i want to get a harness bar, and if the ends of the bar are flush with the plastic, this would be a nice one. What color choices do they have for it?
#19
Senior Member
Thread Starter
Join Date: 03-09-06
Location: "The Valley"-California
Posts: 2,425
Likes: 0
Received 0 Likes
on
0 Posts
unfortunately I think I'll have to cut into the plastic pieces unless I can find a way to change the angle, which I am working on but it's raining so I can't at the moment. I think they have this gunmetal color, red, and blue.
#21
Haz l33t wheelz.
btw, not a big deal, did you ever photoshop the matix stuff to the door?
#22
Senior Member
Thread Starter
Join Date: 03-09-06
Location: "The Valley"-California
Posts: 2,425
Likes: 0
Received 0 Likes
on
0 Posts
nrginnovations.com
my internet doesn't work at my house right now unfortunately, and I think my work would get pissed if I was photo shopping lol I don't even have photo shop here. I'm going to dump my internet company and go with someone else god dammit
BTW there is more modification to get this to fit in the car (which is not pictured) the harness stabilizer bars do not reach all the way to the bolts at the floor, so there's a bracket as an extension. I'm going to find a better way to fix this problem tonight, I'm not going to show pictures yet cause I don't want to give my sponsor a bad name, as soon as I come up with a good fix I'll let you know
BTW there is more modification to get this to fit in the car (which is not pictured) the harness stabilizer bars do not reach all the way to the bolts at the floor, so there's a bracket as an extension. I'm going to find a better way to fix this problem tonight, I'm not going to show pictures yet cause I don't want to give my sponsor a bad name, as soon as I come up with a good fix I'll let you know
Last edited by juststickit124; 02-13-2009 at 12:01 PM. Reason: Automerged Doublepost
#25
Senior Member
Thread Starter
Join Date: 03-09-06
Location: "The Valley"-California
Posts: 2,425
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
Delta coupe
Pictures & Videos
1
09-30-2015 08:11 AM