you never know... cody could break his car again

 

Cant make it out for two reasons....

My car is at the stealership getting the belt replaced.

Turns out it WAS slipping and that explains why i only ran 13.9 in mission. Im not making full boost because of the slipping belt.


AND>..... I got sent out to work in Edson today. So yeah sorry guys.


Hey Ed, yes in calgary your the top dog for redlines, but andrew in BC ran 13.5 on slicks

Ed what size pulley are you running?

 

I'm well aware of his time from "Redline Forums". It's the quickest Redline that I'm aware of.

I'm running a 2.8" pulley. The charger just screams now!

 

did you hafta replace anything else with the pully? how small can we go without needing to replace other things?

 

Originally, I swapped to a 3.1" pulley. That can be done with a stock tune but putting in colder plugs (NGK BKR7E @ 0.040") is a good idea. You might be able to get away with 3.0" pulley, however, you might get some belt slip. I did have a 2.9" pulley on the stock tune, and I was rewarded with the ECU going into limp mode.

So, to give you a quick answer, I'd go with a 3.1" to start.

 

What time tomorrow?

 

sweet the hotel has computers to use... so whats going on tomorrow?

 

I'll be at Race City by 6pm or so.

 

class finishes at about 5 tomorrow so id say ill be in calgary round what 6:30??? i donno and where the hell is race city?

 

Deerfoot (this is highway number 2) south to Barlow Trail (this loops around and goes north)---east on 114th ave (very first set of lights) to 68th-turn south its right there.


Right from Avro's post! :O

 

k someone call me tomorrow in case i get lost lol 780-514-6295 call around 5:45

 

I would say sure, but I'd probably get you lost.
Bahaha

 

okay got your number. Calgary is very easy to get around in--unlike Edmonton.

Just follow my directions. You'll be on Deerfoot for close to 20 minutes--the Barlow turn off is at the south end of the city.

 

Ed, your running the 2.8 and only running 14.3 in calgary?

dont u have stage 1 too?

im running just plain jane stage 2 wtih the 3.06 pulley and i ran 14.1 @104 mph on street tires in calgary. :P

Im not making any changes to my car untill next season. I have big plans for my car next year. Not qui what Rod is doing, but close.

 

I'm hoping to do a few things over winter too. We'll have to compare notes to see what we each have planned.

Don't forget you also have that lighter flywheel and full exhaust. That probably helps a bit. Either way, I'm going tonight, so we'll see if I can get a better time.

 

I dont have the full exhaust. I have the stock header. And 2.25" GMPP PPerformance Cat-back. I have the smallest aftermarket diameter exhaust you can get lol. But I think it sounds the best.

Umm, as for next year... I am either selling the cobalt, or spending lots of money on a custom turbo swap.

 

What time does Race City open? If it's around 5, I'll just go there straight from work, get in a practice run or two before you guys get there! :O
hah

 

Gates open at 5:30 tech starts at about 6 and racing starts at 7.

 

Bummer
Maybe I'll go wash my car first or something
Or maybe buy something for my car...*sigh

Is there anywhere in Calgary that stocks non-ricer cobalt items? Performance stuff/clean exterior things?