doublez

It didnt even have to go to the dealer to be programmed. It was plug and play out of the box. I sent the car over for the flash, took them like six hours to figure out it didnt have to be. I was the first one according to Forbes to have a stage 3 on this side of the border. I had orderd it just as they were finishing it up in michigan. So nobody really knew much about it.

HEATON

iTrader: (3)

Still no call back from GM due to the Issues going on in Oshawa.
I found an 07 SS today.You will need a Tech 2 Scanner.Go into set up BCM,configure options and change the BCM setting from Canada to US.This will allow the shift light to work but also changes the cluster to US.You need to change it back with the cluster info center buttons.
Hope this helps

doublez

Cool, I was talking to andre today at oregans, we are gonna give it a try on monday.

HEATON

iTrader: (3)

Starting to go back together.

bridfi

lookin good

07s represent!

lol

HEATON

iTrader: (3)

Still need to install a hood(when I get one),air intake and a few other little things.







Mods or changes so far include
SS springs,SS nose and fogs,TC upper and lower grilles,SS leather seats,cruise control,A/C,painted Mirror covers,GMPP exhaust,SS tip
I have an air intake and RK Sport hood on the way...

chad463

looks good, hopefully your hood you ordered gets there in better condition then I did.

QuikSilverSS

Wow, another great build Brent, excellent job, looks great...you should see if you can pick up some SS/SC rims...I think i know of a guy that may sell you his ss/sc rims for cheap (really cheap), i will check with him if you want.

HEATON

iTrader: (3)

Thanks Ryan.Let me know on the wheels.I will have to do a 5 lug swap..

QuikSilverSS

I will call him today for you, he asked me a while ago about them, he was only looking for like $300 -400 for all 4 rims, i think that the tires may still even be on them, i will find out and email you